Main  structure:

1.SRL-Z200/500 plastic mixer unit for mixing all the fomula material

2.Automatic feeder for extruder

3.SJSZ-51/105 conical twin screw extruder

4.co-extruder for make the sofe PVC or rubber on the both side of the profile

5.main mould on main extruder and co-extruder

6.Vacuum calibrator table and a form mould(the most important part)

7.Ink printer(to print grains or lines on the surface of the skirting board)

8.Final forming mould(with hot air gun)

9.Haul off machine

10.cutter

11.Stacker