Ads by Google
1.The rang of gram weight: 50-550 g2.The cutting width : 35-1550mm3.The diameter cutting is less than 1600 mm4.Finished specification width : 50/200mm , the diameter of paper is less than 1100mm, After the cut end deviation+-1mm, Paper roll tightness of consistent, end face flush5.The deviation of cutting width : +-0.5mm6.The speed of operation : 0-150m/min7. The suitable material : 50-400 g 8.The mode of taking-up equipment : it adopts double rewinding shaft, it could choose different roll according to your requirement ! it is equipped with air-expansion ( 2 pieces of 3 inch air-expansion rewinding shaft )In the system : Correct an error to make sure good condition , also the scrape edge is 3-8mm.The unwinding parts : it could adjust from left to right , the air-expansion shafts is hard to make sure handing is safe and convenient !Feeding tension control : 20kg magnetic powder control Automatic count meter, alarm and halt equipment , the whole is equipped with safe signal and shield to make sure operate safety.The mainframe adopts 3.7kw stepless frequency speed regulation is 0-150m/min. It adopts the dia is 100mm dynamic balance The rewinding parts : it is adopted double torque motor control , the dia of rewinding is less than 1600mm .
Paper slitting machine