D type hydrapulper is mainly used for breaking waste paper and wet strength paper.

1.General Introduction

D type hydrapulper is designed refering to relevant information/datum based on existing conventional pulper. Its main characters are: fitted with Vokes rotors, deflecting from the equipment center, which makes pulp be able to quickly contact the rotor, thereby the frequency is higher. Traditional hydrapulper generates one unobstructed vortex. Along sprial track, wastepaper moves towards central rotor from feeding point. However, Type D hydrapulper change such flow way like traditional pulper, it can make wastepaper quicker contact rotor, which can shorten treating time from feeding to pulping and increase capacity under not increasing power and volume.

D type hydrapulper is typically equipped with ragger and trash well. Ragger can remove long-strip-shaped twining impurities such as plastic packing bag, rope and iron wire etc. There is one rectangular connection at the bottom of vat of pulper, and the bottom connection is connected to trash well. Through detrasher connected with trasher well, remove plastic foam and other light impurities, thereby achieving continuous production. Heavy inpurities accumulated at the bottom of the trash well are regularly discharged. To achieve batch production, the connection at the bottom of pulper may also be only equipped with one heavy-trash trap.

2.Technical Specifications:

Type	GXZDSD25	GXZDSD26	GXZDSD27	GXZDSD28	GXZDSD29	GXZDSD30	GXZDSD31	GXZDSD32	GXZDSD33	GXZDSD34	GXZDSD35	GXZDSD37
Nominal volume:m3	15	20	25	30	35	40	45	50	60	70	80	100
Treating consistency:%	3~5
Capacity of production:t/d	80-120	140-180	180-230	230-280	270-320	300-370	350-400	400-450	480-550	550-630	600-700	800-900
Power of motor: kw	160	185	220	280	315	355	400	450	560	630	710	900
L×W×H: mm	5080×4940×4200	5330×4130×4390	5330×4400×4880	6500×5100×4760	5270×5290×5450	5150×5600×5550	6300×5830×6000	6400×6050×6200	7200×6250×6500	7300×6700×6800	8500×7000×6800	10000×7650×7200

 

D type hydrapulper