Function:
Suitable for cutting all kinds of tubes in small pieces, such as chemical fibre tube, OPP film tube, Tape cores, etc.
Feature:
1. Servo positioning system, high precise ball screw drive, cutting resolution up to 0.01mm
2. Equiped with double shaft, one is for cutting and the other one is for load/unload, it increase work efficiency than single shaft
3. PLC control, colour touch screen operator.
4. Fully automatic production, automatic fault diagnosis and early warning. (It should be equiped extra auto load/unload device)
5. Suit for a large number of short tubes and other tubes which cutting length is change frequently.
6. Both main shaft speed and shaft changing speed control by frequency.
Induction cutter, when cutter touch the shaft, it will return automatic.
Model | Paper tube recutter JS-A5 | ||
Technical parameter | Control system | ||
Length | 1500mm | PLC controller | Delta |
Diameter | 25-170mm | Man-machine interface | Weinview6070 |
Thickness | 1-20mm | Program version | JS-A5 |
Quantity of knife | 1 set | Inverter | YASKAWA 3.7kw |
Cutting speed | 25m/ min | Actuator | CNHT |
Cutting way | Paper tube rotate, blade axes without rotate | Signal component | Omron |
Load/ Unload material mode | Manual | Pneumatic component | Airtac |
Clamping way | Automatic chuck | Servo motor | YASKAWA |
Operator | 1 person | Leading screw | Taiwan |
Way of moving knife | Pneumatic | Leading track | Taiwan |
Speed regulation | Inverter | ||
Power input | 380V 3 phases 4 lines | ||
Size(mm) | |||
Mainframe :L*W*H | 2500*1200*1500mm | Free component | |
Host power | 3KW | Useful tool | 1 set |
Host speed | 300-1000r/min | Cutting knife | 2 pieces |
Total weight | About 1300kg | ||
Flip-axis power | 1.5KW | ||
Cut-table moving power | 1KW servo motor |