Welcome to ECOL - Join Free - Sign In
ISO certified High anticorrosion Epoxy Resins Solid Powder Coating
ISO certified High anticorrosion Epoxy Resins Solid Powder Coating
Supplier Info
[China Supplier]
Contact Person : Ms. Wang Terry
Tel : 0086-25-57909280
Fax :
Product Detail
1)Stable &high quality 2)ISO 3)Professional after-selling service 4)RoHS

JINHU COLOR POWDER COATING CO.LTD Provides a wide range of anti-corrossion epoxy resins solid powder coating . 

PHYSICAL PROPERTIES

Specific gravity : 1.2 ~ 1.8g/cm3 up to colorsParticle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)Level of liquidity: 24 ~ 27 mm

CURING CONDITIONS

180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE 

8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

  

.

Mechanical property

Testing items

Standards and methods

Inspecting index

impact strength

GB/T1732-1993, AS3715 2.8  

30-50kg/cm

Bending resistance

GB/T1185-88, AS1580 402.1, ISO9227    

Pass 2-5 millimeters

Adhesion CHECKED TEST

GB/T9286-88,2mm Cross cut, ISO2409 

Pass100/100, passes 0 levels

Cupdrawing:Erichsen, ISO1520  

Erichsen, ISO1520    

Pass 3-7 millimeters

Pencil hardness

GB/T6739-86, Mitsubishi 

Pass H-2H

Chemical resistance and weather resistance

Salt spray test

GB/T1771-91,500 hours

The cross section of corrosion less than 2MM

Hot and damp resistance test

the GB/T17740-79(89),1000 hours 

Without air bubbles, loses the light slightly

Acid resistance

10% CH3COOH, 240 hours 

Without air bubbles, the surface without damage 

Alkali resistance

10% NaOH, 240 hours

Without air bubbles, the surface without damage

Heat resistance

200degree,1 hour 

The color change is lower than E=1.5

Solvent resistance

MEK24 hours soaked in solvent-free

Without air bubbles, the surface without damage

uvioresistant

QUV-313,500 hours

Gloss higher than 80% lower than the Munsell color change level

Water tolerance of

2 hours

No bubble, not falling, losing light

ISO certified High anticorrosion Epoxy Resins Solid Powder Coating

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.