Zirconia Silicate Beads are produced by fusion and sintering process with different density.

Zirconia Silicate beads

(Fusion&Sintering process)

 

Product	Process	Components	Real Density [g/cm³]	Bulk Density [g/cm³]	Hardness  [Mohs]
ZSB-Fusion	Fusion	ZrO268%; SiO2 31%	3.86	2.3	7.2
ZSB	Sintering	ZrO268%; SiO2 31%	4.0	2.5	8
Size [mm]	0.4-0.6, 0.6-0.8, 0.8-1.0, 1.0-1.2, 1.2-1.4, 1.4-1.6, 1.6-2.0, 2.0-2.5,range can be customized.
Application	Used for wet grinding : Kaolin clay, Calcium carbonate, TiO2, Zirconium silicate, Ink, Pigments, Paints etc., industries.

 Application  Zirconia Silicate Beads are produced by fusion and sintering process with different density.  The very fine and homogeneous microstructure allows an ideal grinding effect. Our ZSB have reached international standard in all specifications and performance. It can be applied in grinding and dispersing such materials as calcium carbonate, kaolin, titanium dioxide, coating, paint, and ink.  

Characteristic

1. The internal structure of the bead is very fine and homogeneous due to the special technique, thus ensuring the even quality of material being grinded.

2. Tough bead bears impact better, and minimum friction allows minimum wear down to the equipment. 

 3. High density greatly enhances grinding effect and efficiency.

 4. Lower wear loss and enhanced service life.

 

 

Zirconium Silicate