Ads by Google
SMTechnology C8 semi-automatic digital soldering station
Fixed the soldering tips on the machine,it can feeder soldering to the head of the soldering tips automatically(no need one hand with solder,anther hand hold solder handle)so this permit operator hold the solder equipment with two hands
Footswitch control solder feeder
Specification:
| Out put voltage | AC110V/50hz AC220V/60hz |
| Consumption power | 95W |
| Heater power | AC24v 80W |
| Motor power | DC24V 65mA |
| solder feeder speed | 3mm/s-30mm/s |
| solder feeder time | 0.00s-65.00s |
| solder back time | 0.00s-6.00s |
| Transport model | Auto/Manual |
| Temp. range | 150-450°C |
| solder back time | 0.00s-6.00s |
| Temperature stability | ±1°C |
| Sleeping time | 1-60min |
| Sleeping temp.range | 50°C-below the setted temp. |
| The potential between tips and grounding | between 2mv |
| The resistance between tips and grounding | between 2mΩ |
| Solder Dia | 0.5/0.6/0.8/1.0/1.2/1.5/1.6mm |
Features:
Two ways of soldering feeding
a,Auto soldering feeder:open the machine,fixed solder wire length,cycle operation
b,Manual soldering feeding:press the switch to feeder solder,loose switch to stop solder feeding
Freely set solder feeding length(under Auto model,achieved by setting solder feeding time)
Freely set soldering feeding speed,quick or slow as requirmennt
Feeding solder position can rotate to aleatoric angle of the solder tip
Nose(soldering tips)angle adjustable
Installment way
Split-type assemble way:Nose install on the working station,controller assemble in the other suitable place.
Intergrated soldering body assemble way:connect Nose and controller together(factory out install way)
Solder anti-splash function
Punch cut on the solder can decrease the splash during soldering. Note: solder tube option as per solder wire
Application way
Soldering application range:DB head,cable,USB,Communication connector and electric wire.
C8 semi-automatic digital soldering station