Ads by Google
High frequency induction machine
Main technical data:
Model | HTG | Max Input power | 9(7.5)KVA |
Voltage | 220V 50-60Hz | Cooling water pressure | 0.1-0.3Mpa |
Voltage range | 180-245V | Weight | 19-22kg |
Vibrate | 30-100KHz | Volume | 190*360*130 |
Heating current | 200-1000(800)A | Duty cycle | >80% |
The high frequecy induction machine mainly used in metal tube welding,alloy cutter welding,carbide saw blade welding,diamond saw blade welding,core drill bit welding and so on
Metal tube welding:such as cooper tube,steel tube,and aluminum tube's butt welding,plug welding and welding sets.
The advantage for use the metal tube welding(recommednd silver solder welding ring)
1.Induction heating speedm,high efficiency.
2.Compared withh oxygen welding,energy saving and low cost
3.oxidation of small area
4.The appearance is exquisite,firm,full after welding
5.Heating uniform,so no lack solder joints and leakage solder joints
Alloy cutter welding:Such ade alloy turning,milling cutter,planer,saw blades,reamer.boring knife
The advantages:
1.Induction heating speed,high efficiency
2.Simply put the sliver solder piece between head and the substrate
3.Energy saving and low cost
4.The apperance is exquisite after welding
6.Heating uniform,so no lack solder joints and leakage solder joints
Carbide saw blade welding:diamond saw blade welding,diamond core drill bit,diamond grinding wheel ,woodworking saw blade welding,cut grass piece of welding,cut aluminum welding.
The advantages:
1.Efficient and fast welding,1-5 per teeth
2.Reproducibility,each tooth has a good repeatability
3.Heat quickly and evenly.which can effectively prevent serrated local overheating caused by the jagged and brittle fracture.Can also be caused by lack of penetration to prevent tooth fall off and other negative phenomenon
4.Suitable for welding of high performance,high hardness serrated blades,this blades can not be welded with resistance welding
5.Less electricity
Metal welding such as:towel rack,soap nets,tower holder,auto-accessories,moto-accessories,metal terminals,hardware pieces,electric heating tube parts and fasteners
The advantages:
1.Induction heating speed,high efficiency
2.Engry saving and low cost
3.Once can weld multiple work pieces,so that can greatly increased welding efficiency
4.Oxidation of small area
5.Heating uniform,so no lack solder joints and leakage solder joints
6.The appearance is exquisite after welding
Small metal tin welding
The advantages:
1.Induction heating speed ,high efficiency
2.Energy saving and low cost,less electricity
3.Once can weld multiple workpiece,so that can greatly increased welding efficiency
4.By heating temperature low so there is no oxidation layer
5.The apperance is exquisite,firm,full after welding
high frequency induction machine picture:
Company