Ads by Google
2012 the most popular goods--Build your own railway kingdom
This is recycle factory,they produce the railway set--Make unlimited paper tracjs from scrap paper!It's fun to play it .You can make the railyway by youself. You can control the length of railway ,and you don't worry it will waste resource,because it make from scrap paper! This is the most popular point.
Instruction Manual
Please kindly take a few minutes to read the instruction manual to explore full features of Recycle Factory Railway Set.
Make sure cintents are complete:
curve mold*1 cross mold*1 straight mold*1 drainer dish*1 paper blender*1 motorized engine*1 flat cars*3 paper accessor*1
Basic Instruction:1.Tear 1 A4 pieces of A4 size scrap paper into tiny pieces.2.Place the Blender Lid onto the Bowl.3.Make sure no paper is trapped underneath the blender blade.4.Turn the Blender Lid clockwise until it islocked tightly.5.Put the Blender Handle in place6.Turn the Blender Handle clockwise at moderate speed.Blend for around 2-3 minutes until the paper pieces broken down into a slurry.7.Pick one of the three provided Mold Casings(Straight, Curve or Cross) and place it on the Drainer Dish.Make sure the Mold Casing has its correct side facing up.8.Put the sent in a basin.Pour all the slurry into the Mold Casing slowly.Insert the right Mold Core into the Mold Casing and gently press until it is about halfway down.9.Carefully grip the paper track by its sides and lift it off the mold.10.Carefully cut away all the excess edges with a pair of scissors when the paper tracks are completely dried.11.Good and clwan paper tracks should look like these.
Battery Installation:
1.Use a Phillips screwdriver to unscrew the Motorized Engine’s top casing.
NOTE: Unscrew only the middle screw.2.Lift off the Motorized Engine's top casing to reveal the battery compartment. Install one 1.5V AA/LRS alkaline battery (not include) in the battery compartment. Make sure to follow correctly the positive(+) and negative(-) polarities with the corresponding markings inside the battery compartment.3.Reinstall the Motorized Engine's top casing and tighten the screw.Useful Tips:
1.For scrap papers which are not in A4 sizes, use an electronic scale(graduation 0.1 g)(not include) to help.Weigh 7-8 gram of scrap papers to make one paper track2.Add a few drops of water color would give you evenly colored tracks!3.Cut the scrap papers into very small flakes will help speeding up the blending process and result in a very fine slurry.Railway Layout Examples:
Example 1: Oval Set: Straight Track *4 + Curve Track * 8
Example 2: Figure"8" Set: Straight Track * 4 + Curve Track * 12 + Cross Track * 1
Drying:
To sun dry, place the wet paper tracks on thick layers of dry newspapers under direct sunlight. Frequently replace the wet newspapers with dry ones.
NOTE: On dry and sunny days, it should take about 6 hours for the paper tracks to get fully dried.Drying time will vary in wide ranges under different humidity,temperature and venttilation environments.For example, in an indoor room without sunlight or ventilation, it can take as long as 5 days to get completely dried!
Battery Safety Information:
*Batteries should always be replaced by an adult.
*Non-rechargeable batteries are not to be removed from the toy before being charged.
*Recgargeable batteries are to be removed from the boy before being charged.
*Rechargeable batteries are only to be charged under adult supervision.
*Different types of batteries or new and used batteries are not to be mixed.
*Batteries are to be inserted with the correct polarity.
*Exhausted batteries are to be removed from the boy.
*The supply terminals are not tobe short-circuited
*Pleaseratain this information for future refeerence.
Notice:
The pictures of railway show to you:
2012 the most popular goods--Build your own railway kingdom