Mobile Signal Booster / Repeater GSM booster / repeater 2G booster / repeater 3G booster / repeater RF booster / repeater Name: S10A-DB/ 15A-DB/ S20A-DB10dBm~20dBm Dual SystemBuilt in Antenna TypeRepeater Kit Available1. CE ROHS certified 2. Industrial standard repeaters for cellular operators3. Built in server antenna for very quick installation4. ETSI & 3GPP 3GPP2 standards5. Support any cellular devices (voice data video) 6. Dual System to amplify any two relevant systems7. SOHO solution for small or medium areas8. Alarm LED's for error detection9. Manual gain control for UL and DL10. Linked UL & DL Automatic gain control 11. Auto shut down if oscillation is detected 12. Universal power range of 90V~265V13.Small size light weight low power consumptionDescription

    S10A-DB,S15A-DB,S20A-DB repeaters are dual band repeater that would amplify two systems at the same time, for example GSM+DCS, GSM+WCDMA, CDMA+PCS, etc. Though it is dual band, it has quite compact size, the same size with that of single band S10A~S20A and similar power consumption.  

1. S10A-DB ~S20A-DB are industrial repeaters, specially designed to help mobile operators to amplify mobile signals in indoor areas where 70% of the mobile traffic have been generated.

2. It is a SOHO solution with built in antennas, it can effectively increase the acceptance willingness of the property ownersas it is elegant looking, compact size for space saving, lower power consumption and can be installed within one hour.Additionally, the built in antennas can be removed so that more antennas can be connected with the repeater to covermuch larger area

3.They have below recommended coverage sizes:

1) S10A-DB: 100~800 square meters

2) S15A-DB: 800~1500 square meters

3) S20A-DB: 1000~2000 square meters.

4.The band selective repeater design to support any two relevant systems of GSM850, GSM900, DCS, PCS; CDMA450,CDMA800, CDMA1900, CDMA2000, WCDMA2100 and AWS

5.The repeater gets quite comprehensive functions:

1) Intermediate SAW filter technology for very sharp out of band rejection to amplify only specific operators' signals and reject all the others.  

2) Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage duringinstallation or maintenance

3)To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.

4) Auto shut off design available for both uplink and downlink to avoid serious interference to network effectively when the repeater is in deep self-oscillation or very strong input power.

Repeater Kit available:

1. Repeater unit with power cord and adaptor.

2. External Panel 7dBi as donor antenna.

3. 15meter long 5D coax cable with loss of 3~5dB depending on different working frequencies (800~2500MHz).

4. Server antennas: built in antenna or indoor wide band omni ceiling antenna 3dBi gain, or indoor wide band panel antenna 7dBi gain.

Cell Signal Booster / Repeater / Amplifier