Welcome to ECOL - Join Free - Sign In
Electrical heating element solar water heater 1500W, 2000W
Electrical heating element solar water heater 1500W, 2000W
Supplier Info
[China Supplier]
Contact Person : Ms. Shen Yolanda
Tel : 86-573-82201491
Fax : 86-573-82201491
Product Detail
Electrical heating element 1.solar water heater with 1500W electric heater 2.the power are depend on the water capacity 3.1

Electric heater

                                 

I,     Installation

1,Should select three-core cable, which accords with the state standards and matches the power of the heater, as power line.

2,Check whether the ground connection of its matching socket of the user is reliable; whether it can be used under the conditions of powerful electric current for a long time. Otherwise, it should be changed.

3,The heater should be installed inside the Solar-energy pre-reserved hole. Its method is according to the relative rules of operation of water and electricity installation.

4,(1) As to HY-1, take off two small self-tightening screws by using the small crossing opener (not take off those with glue film),take out the plastic shell, thread the holes of the screws, connect to the inside of the end line, tighten the screws, tighten the line, put into the plastic shell and fix the power line.

(2) As to HY-4, correctly connect the power line to the wire of the heater and then fix it tightly. The whole plastic should be water-proofed and rain-proofed.

   5, The yellow double-colored line is the ground-connecting line. Tit connection to the ground should be reliable.

   6,(1) The heater should accord with the pro-tective plug of leagage of electricity to realize the automatic protective function of leagage of electricity.

     (2) If you choose non-integent controlling heater, you should choose the heater with temperature-controlling device, to realize automatic-limiting temperature.

II,   Cautions

1,Our product should be used according with leagage-electricity protector. In order to be safe, when the user use water or take a bath, you should cut off the power. Not use water with electricity.

2,When you use the heater, you should do try-regulation. To the leagage-electricity protector to insure its sensitive and reliability.

3,If you want to heat the produce, you should connect it to electricity more than two hours and make sure the water of the tank should be full. If the tank is empty, it can burn out the heater and cause bad consequences.

4,As to anti-dry heating product, at the required temperature, if you want to use it again, you should take off the plug or cut off the power. After three to five minutes, connect to the power to go on heating.

5,The set maximum temperature of our product is about 70°C. While working, the plug of leagage-electricity protection has the function of two-color indication. When the red light is on, it is heated. When the green light is on, it is in heat preservation.

III,   Protection and Maintanance

   1,If you find the plastic shell at the two electric poles of the leagage-electricity protector to be hot and full of bumps and holes, you should stop using it and find the causes, change the socket with the state standards and change the plug. Otherwise it is too dangerous!

   2,You should often check the power line, because it is exposed to wind, rain and sunshine. (For example, when electricity can’t be sent in rainy days, first of all, we should consider to change the circuit. )

   3,In using it, if you have any hitch please make contact with the seller and the producing factory.

                            HY-4                                                                       HY-1

     

   

Electrical heating element solar water heater 1500W, 2000W

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.