Textile printing thickener Easy to printing paste formation Good rheological property Good resistance to electrolyte

Our Modified starch (TGS5-C) is featured with:

Easy printing paste formationGood rheological propertyFree from preservativeGood resistance to electrolyte

Application:

Thickener for printing paste, specifically for

disperse dye printingrayon discharge printingnylon spandex fabric printing

Specification:

Apprearance: White or off-white granularsSolubility: Swelling in cold waterpH: 10-12.5Viscosity (8% solution): ≥35,000 mPa.s (by BH viscometer) Ionicity: AnionicMoisture: ≤14%

Preparing of printing paste:

Dosage: 7-8%

Add the modified starch powder into water while stirring. Rest the paste for 3-4hours, and then stir a few serve, the paste is ready for use.

Notice: The longer rest time during preparation, the better leveling performance of the paste

Modified Starch TGS5-C (Disperse Dye Printing Thickener)