Welcome to ECOL - Join Free - Sign In
Free-spraying refrigerator pillar plastic color
Free-spraying refrigerator pillar plastic color
Supplier Info
[China Supplier]
Contact Person : Mr. David Cui
Tel : 86-510-86515960
Fax : 86-510-86500913
Product Detail
1.Plastic color for pvc co-extrusion 2.Eco-friendly 3.Various colors 4.Customized formulation

The product introduction of plastic color

1. Plastic color TM- The solution of plastic profiles colorize

Plastic color TM is according to German factory technology, and produce depending on this designed equipments of our own company.It’s the new type plastic alloy material used for co-extrusion production colorful profiles and colorful surface. it has good compatibility with PVC, excellent weathering resistance, excellent surface gloss and hardness higher and many other characterist

2. Plastic color TM and other surface colorize methods for comparison

Colorize methods

Advantage

Disadvantage

Overall color mixture method

Simple production technology

Difficult to control color,and weather resistance is poor

Painting method

Wide-range Color select ,flexible construction

Waste much paint ,and poor surface quality

Coated method

Flexible Construction,convenient operation

Membrane is easy to fall off, not suitable for outdoor use

Plastic color TM co-extrusion method

Simple production technology, convenient operation ,and wide-range Color select.

All the shortcomings above improved

 3. Plastic color TM processing using co-extruding equipment

Co-extrusion equipment use two sets of extrusion machines, a extruder extrusion white PVC profile main ingredient, the other one is used to model the plastic color TM plasitcization and extrusion, the latter usually adopt the smaller diameter single screw extruder, two kinds of materials melt extrude through a head, and then crowded and pull into the material finalize the design molding and water tanks, and after cooling can get qualified colorful profile.

 4. The physical properties and chemical properties of plastic color TM

Appearance: seed makings shape of solid

Bouquet: no special odor

Melting point: no definite melting point, with a wide range of temperature (130 DHS C ~ 150 DHS C) gradually softened.

Proportion: 1.19 g/cm3

Solvent solubility: insoluble in water, but soluble in solvent (chloroform, etc.).

 5. Packing and other matters

(1)Packing: 25 kg paper-plastic bag packaging or 25 kg or pack the aluminum film bag vacuum packaging.

(2) when using note: before using we advice gets fully dry, dry temperature is 85ºC, dry time is for 4 hours. The production process should be dustproof,moistureproof, prevent mixing, so as to ensure the product appearance.

(3)Suggest processing temperature

Heating section

Heating one area

Heating two area

Heating three area

Heating four area

Confluence area

Mouth mode

SET TEMP

180—195

185—195

185—200

185—200

190—205

200—210

Note: the above are Suggestion temperatures, the temperature in the process of operation shall be in the actual situation and decide.

6. The colors of plastic color TM

  S01     S02     S03

G01     G02     G03

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.