Product Name: biodegradable pla resin
The main ingredients: starch ≥ 40% ≥ 12%; grease; PE ≥ 30%; the various auxiliaries ≥ 18%.
Features: light yellow, slightly starch flavor, easy to absorb moisture, easily decomposed by
microorganisms, natural antistatic, cylindrical or round particulate processing temperature
lower than ordinary plastic, coloring good performance can be directly processed into
products, not The need to add PE, PP, PVA, EVA and other polyolefin materials can be
processed into products.
Appearance | Light yellow granular, no smell |
Biodegradable Component Content % | 100 |
Moisture Content % | ≤ 1.20 |
Melt Flow Rate g/10min | 1.5-6 |
Density g/cm3 | 1.15-1.25 |
Tensile Strength (Vertical ,Horizontal) Mpa | > 12 |
Elongation at Break (Vertical ,Horizontal) % | >200 |
Angle Tear Strength(Vertical ,Horizontal)N/mm | ≥60 |
Enzyme Bacteria Degrading Stage(21d) | ≥2 |
Ignition Residue % | ≤0.20 |
The Hexane Extract % | ≤4.00 |
KMnO4 Consumption mg/L | ≤35.0 |
Biodegradable Duration | 180 days |
Suggested Applications: all kinds of anti-static film products, such as: electronic products
packaging film, car interior packaging film, packaging film of home appliances, dust-proof
packaging film, medical film, agricultural film, shopping bags, vest bags, paper bags, filter
disposable green plastic bags, storage bags, garbage bags, bags on roll, disposable gloves,
tablecloths, aprons, raincoats products.
Processing equipment; common blown film machine, casting machine, bag making machine,
printing press sealing machine can produce.
Process:Film blowing machine try to choose the Screw aspect ratio larger L / D ≥ 25 1:1; blowing die
with the diameter of the tube membrane sheets than> 1:3, so that is conducive to the
plasticizing and improve product quality and yield.
This product blown film and LDPE blown film material blend blown film, HDPE blends blown
film need to add a certain proportion of LLDPE or LDPE (MI 4)
3 the blown film made of just due to severe dehydration, the feel more brittle, lower tensile
strength, for 24 hours, enhance tensile
Strength, tear strength, elongation is significantly increased, so the blown film should be
placed after a period of time and then printing bag.
4 can be blown more than 0.006mm film products.
Note:
1.Due to the starch content, easy to absorb, store sealed packaging, pay attention to
moisture.
2, such as the product water exceeded, should be dried after use, drying time is 2 hours, the
temperature of 105 ° C.
Processing temperature lower than that of PE 5-10 °C, processing film, the hopper the thick
corn flavor is the best temperature.
Microbial survival environment, easily decomposed into soil friendly substances.
biodegradable pla resin