1.small measurement, light weight, 2. easy to operate, 3.high working efficiency 4. low price but top quality

 

Hydraulic rock and concrete splitter is our patent product (patent no. : 200930205768.2). It uses high-pressure hydraulic oil as the energy source and adopts the principle of wedge effect. The wedges of splitter are inserted in predrilled hole and out of three wedges the center taper wedge is forced between the two counter wedges by hydraulic pressure forcing them apart. The pressure is transferred to the walls of the rock developing a crack and split further. The splitting power can achieve hundreds of tons, so our machine can easily split huge stones in a few seconds, making hard rocks separate from the mountains.

 

Operation procedures

 

Drilling

 

The primary operation while using Hydraulic Splitter is drilling a hole in the material to be demolished. This easier by the conventional method of pneumatic drilling with compressor & jackhammer (Drill rod of 800mm length and cross bit Dia. of 32-50mm.) The hole diameter should not be less than 32 mm and the depth less than 45cm.  The holes should always be straight (Wedges are subjected to undue stresses due to a zigzag hole). The quantity of holes depends upon the rock strata and quality. The distance between two holes is also usually maintained between 12-18" and about 8-10" from tableside again depending on the quality of the rock.

 

 

  

Splitting

 

After the drilling operation the splitter wedges (two counter wedges and one center wedge) are inserted in the hole. The control lever sets the forward and reverse stroke of the wedge movement. The hydraulic pressure pushes the center wedge forcing the two counter wedges to fly outwards, exerting pressure and splitting the material. Out the several advantages of Splitter operation as fast as 7-8 seconds, accelerate the excavation speed. The Excavation is also directly proportional to the number of holes drilled simultaneously.

 

 

Salient Features

 

Controlled directional cracking. The required direction of the crack can be obtained by just positioning the handle of the splitter perpendicular to the direction of the required crack.

 

Much faster and greater output as compared to the conventional chiseling/chipping methods as the output is directly proportional to the No. of holes drilled.  

 

Noiseless, Environ-friendly and dust free operation. Single person operation.

 

Advantages:

 

1.Economical

 

2. Safe

 

3. Environmental-friendly

 

4. Durable

 

5. Autonomy

 

6. Easy to use

 

7. Controlled demolition

 

Multitude of applications

 

There are different types of splitting cylinders available for variety of appliance. The main applications are as follows:

 

1. Demolition of rock, concrete and reinforced concrete

 

2. Demolition work in closed spaces and places that are of difficult access (e.g. in elevator shafts)

 

3. Demolition work in extremely cramped spaces

 

4. Demolition of walls, wall openings, factory chimneys

 

5. Secondary splitting of concrete slabs (e.g. preparing concrete for recycling)

 

6. Underwater demolition, tunneling

 

7. Secondary splitting of large boulders and secondary splitting

 

8. Enlarging work in underground mining

 

9. Pipe jacking/micro tunneling

 

10. Production of blocks in the natural stone industry, including marble, granite and sandstone

 

 

 

 

A complete rock and concrete splitters compromises 3 components:

 

one or several splitting cylinders

 

one hydraulic pump unit

 

one set of high and low-pressure hoses

 

 

 

 

hydraulic stone splitter