Ads by Google
TF series self-priming suction filter boxThis filter is installed in the pump suction mouth, to protect the pumps and other hydraulic components, in order to avoid inhalation contamination, effectively control the pollution of hydraulic system, improve the cleanliness of hydraulic system.The filter can be installed directly in the tank side edge, top or bottom, oil cylinder immersed in the oil tank liquid level of the fuel in the tank, a filter head, and a self-sealing valve, bypass valve, filter pollution block signaling device, so that the filter element replacement and cleaning filter tank liquid can not flow out, this product novel design, convenient installation, oil capacity, small resistance, filter cleaning or replacement is convenient.Performance and characteristics:1, convenient installation and connection, simplify the system pipeline:The filter can be installed directly in the tank side, bottom or upper, a filter head in oil tank, oil cylinder immersed in the oil tank liquid level of the oil outlet is arranged, tube type, flange type connection are arranged in the filter, the self-sealing valve device, the pipeline saves a stop valve and other fittings, so that the line simplification, convenient installation.2, setting the self-sealing valve, so that the replacement, cleaning the filter element or repair system is very convenient:When cleaning the filter element replacement, or repair system, only need to unscrew filter end cap ( cleaning cover ), the self-sealing valve is automatically closed, isolated fuel tank oil tank, the oil will not flowing out, thereby allowing the cleaning, replacement of the filter element or repair system is very convenient, such as open top self-sealing valve can also be used as a fuel tank placed outward oil of.3, having a filter element pollution indicator and the by-pass valve, improving the reliability of hydraulic system:When the filter element is contaminants clogging to outlet vacuum degree of 0.018MPa, transmitting device sends out a signal, it should be replaced or cleaned filter core. At this time if not immediately stop or no one to replace the filter element, located in the upper part of filter element of the by-pass valve will automatically open (open value : the vacuum0.02MPa ), in order to avoid the air suction pump has fault. But this should stop to replace or clean the filter, in order to maintain the cleanliness of hydraulic system, improve the reliability of hydraulic system.
TF series self-priming suction filter box