Arch roof building machine Coil thickness: 0.8-1.5mm Coil width: 600mm-1250mm Largest span: 42m Directly produce on worksite

Introduction:

The Q span arch sheet forming machine is a kind of arch building machine. It is composed of decoiler, straight panel forming unit, arch panel forming unit and other accessories.

 

Features:

1. The Q span, equipped with a power set, can automatically transport the colored steel sheet.

2. Similar to the USA machine, this equipment improved the hydraulic cutting system to electric mould cutting system so that oil leakage of the arch sheet forming machine can be avoided.

3. Adjustment of curving degree on this machinery is easy to operate because of using hand wheel and counter so that the accuracy is also ensured.

4. The rollers of this arch roof forming machine are made of good steel, and then are coated with chrome. So this equipment has good performance of corrosion resistance.

5. Our machine can be divided in to two cutting ways, one is hydraulic, and the other is mechanical. Controlling system is PLC.

 

Application:

Using this machinery can use in the construction of warehouses, workshops, hangars, and vehicles, etc.

 

TYPE	Width of the coil (mm)	Width of the finished sheet (mm)	The depth of the groove (mm)	Thickness of the coil (mm)	Max span	Use ratio
CS-600-305	600	305	109	0.8-1.5	≤24m	51%
CS-914-400	914	400	210	0.8-1.5	≤40m	43.8%
CS-914-610	914	610	203	0.8-1.5	≤38m	66.7%
CS-914-650	914	650	181	0.8-1.5	≤28m	71.1%
CS-914-700	914	700	123	0.8-1.5	≤24m	76.6%
CS-914-750	914	750	86	0.8-1.5	≤15m	82%
CS-1000-400	1000	400	253	0.8-1.5	≤40m	40%
CS-1000-550	1000	550	187.5	0.8-1.5	≤30m	55%
CS-1000-610	1000	610	243	0.8-1.5	≤39m	61%
CS-1000-680	1000	680	223	0.8-1.5	≤32m	68%
CS-1000-700	1000	700	175	0.8-1.5	≤28m	70%
CS-1000-750	1000	750	138	0.8-1.5	≤25m	75%
CS-1000-800	1000	800	114	0.8-1.5	≤14m	80%
CS-1220-800	1220	800	300	0.8-1.5	≤42m	65.5%
CS-1250-800	1250	800	320	0.8-1.5	≤42m	64%