Welcome to ECOL - Join Free - Sign In
Gypsum plasterboard plant
Gypsum plasterboard plant
Supplier Info
[China Supplier]
Contact Person : Mr. Shi Jerry
Tel : 86-152-64835933
Fax : 86-152-64835933
Product Detail
1.ISO90001:2000 2.More than 15years of manufacturing experience 3.Fully Automatic 4.Environmental friendly 5.Lower cost

Gypsum plasterboard plant adopts the German company, Lafarge, the United States companies and domestic well-known enterprises Kitashinchi Group, Taihe Group advanced technology. We adopts the horizontal flow, vertical airflow heat exchanger heating system, the raw material feeding system and edge cutting and edge sealing and edge grinding and recycling system and stacking system are all controlled by computer. All the whole line is full automation.

1. Capacity 2 million m2/year~50 million m2/year

2. Automation Fully automatic

3. Drying system Using hot air for drying(Heat exchanger)

4. Fuel Coal, natural gas, heavy oil and diesel oil

5. Main materials

Construction gypsum powder, modified starch, protective paper, foaming agent, water, white latex. Fiberglass and paper pulp (adding selectively according to different raw materials and kinds of products) Quantity of raw material required for producing per m2 gypsum board (referenced data) (thickness based of gypsum board: 9.5mm)

Gypsum powder(CaSO4·1/2H2O)

6.8kg/m2

Protective paper

0.48kg/m2

Modified starch

0.035kg/m2

Foaming agent

0.008kg/m2

White latex

0.005kg/m2

Fiberglass (used selectively )

0.025kg/m2

Electricity

0.3kwh/m2

Water

4.8kg/m2

Heavy oil

Heat consumption~3800kcal/m2

Natural gas

Heat consumption~3800kcal/m2

Performance index of all materials (referenced data)

6. Dimension of product:

Thickness 8mm-22mmwidth 1200mm or 1220mmlength 2400mm~3600mmwe can design and manufacture products of other dimensions as clients’ special requirement.

7. Standard of product quality

In conformity with national standard GB9775-2008

8. Category

a) Common paper surface gypsum board b) Fireproof paper surface gypsum board (H)c) Waterproof paper surface gypsum board (S)

9.The follwoing are all the required system

9.1 Raw material supplying system

 Raw material is transported and lifted to feeding hopper, after measurement it comes to vertical mixer. Face and back paperboard are lifted to each shelf. They are tensioned with special tension unit. Mixed material from vertical mixer falls down to back paperboard, then formed into shape and covered with face paperboard, after last flattening the semi finished plasterboard is completed.

9.2.Mixer

It will mix the raw material completely.

Vesicant and starch and powder and water will be blended in the mixer.

9.3.Conveying system

Conveying and Concreting

Semi-finished plasterboard from formation section is automatically edge trimmed into continuous palsterboard, conveyed to concreting station and automatically cut.

 

 9.4. Transferring system

Transferring section

Concreted plasterboard automatically transferred and cut in middle, saving raw material.

 

9.5 Drying system

Drying room

Plasterboard Transferred automatically into drying room which has shelves 5-storey or 6-storey supporting 2 lapped sheets, with 50m, 60m, 70m, and 90meters length range.

 

9.6 Stacker system

Finishing section

Automatically cut into dimensions you pre-set to avoid defect product occurrence and higher efficiency.

 

9.7 Gypsum board controlling system

Gypsum plasterboard plant

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.