Application is industry Detailed Product Description

Monel 400 plate 1.good corrosion resistance,good weldability 2.resistant to most alkalis,salts 3.sheet,bar,tube,wire,flang                                                               Monel 400 plate

Chemical composition

Alloy	%	Ni	Cu	Fe	C	Mn	Si	s
Monel400	Min	63	28
	Max		34	2.5	0.3	2	0.5	0.024

Monel 400 Physical properties

Density	8.83 g/cm³
Melting point	1300-1390 °C

Monel 400 Alloy minimum mechanical properties in the room temperature

Alloy state	Tensile strengthRm N/mm²	Yield strengthR P0. 2 N/mm²	ElongationA 5 %
Monel400	480	170	35

 Monel 400 Corrosion resistanceMonel 400 alloy in the fluoride gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives have a very good corrosion resistance property, and possess better corrosion resistance more than the copper alloy in the sea water. Acid medium: Monel 400 have corrosion resistance in less than 85% consistency of sulfuric acid. Monel 400 is an important material that resistant to hydrofluoric acid. Water corrosion: Monel 400 alloy in most corrosion cases of water, not only excellent corrosion resistance, but also less pitting, stress corrosion, the corrosion rate less than 0.025mm / a. High temperature corrosion: Monel 400 for the work of the highest temperature at about 600 °C in general in the air, in the high temperature steam, the corrosion rate less than 0.026mm / a. Ammonia: Monel 400 can be resistant to an hydrous ammonia and aminate conditions corrosion below 585 °C due to the high nickel.

 

Monel 400 Application fieldMonel 400 alloy is a multi-purpose material in many industrial applications: 1. Seamless water pipe in the power factory2. Sea-water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude distillation 5. Sea-water in the use of equipment and propeller shaft 6. Nuclear industry and used in the manufacture of uranium enrichment isotope separation equipment 7. Manufacturing hydrochloric acid equipment used in the production of pump and valve

 

Name	OD	Length	Wall	Height	Remarks
Rod	φ12-φ300m/m	500-5000m/m
Flange	ASME 16.5(Amecan da),HG20592(Euean da), SH3406(Petchal da)
Ring	φ200-1500 m/m		20-300 m/m	25-300 m/m
Cake	φ150-1500 m/m			25-300 m/m
Pipe	φ65-200 m/m	1000-9000m/m	1.5-25 m/m		(Single weight does not exceed350kg)
Plate		700-2000 m/m	1-28 m/m		Widt500-2000 m/m
Plate		700-2000 m/m	0.5-3.2 m/m		Width700-1000 m/m

                                                                                              

                                                                                               Monel 400 nickel alloy plate