ASTMInconel X-750 Diameter:3-100mm Density :8.2 8g/cm3 Product:inconel600.601.625.x-750.718

ASTM Inconel X-750 bar

Inconel X-750 Characteristic as belowInconel X-750 is a precipitation-hardenable alloy which has been used in applications such as high temperature structural members for gas turbines, jet engine parts, nuclear power plant applications, heat-treating fixtures, forming tools, and extrusion dies. The alloy is highly resistant to chemical corrosion and oxidation and has high stress-rupture strength and low creep rates under high stresses at temperatures up to 1500°F (816°C) after suitable heat treatment.Inconel X-750 MachinabilityConventional machining techniques used for iron based alloys may be used. This alloy does work-harden during machining and has higher strength and "gumminess" not typical of steels. Heavy duty machining equipment and tooling should be used to minimize chatter or work-hardening of the alloy ahead of the cutting. Inconel X-750 Corrosion resistanceInconel X-750 has excellent resistance to chloride ion stress-corrosion cracking. It exhibits satisfactory resistance to numerous oxidizing environments. The alloy has similar corrosion resistance to alloy 600 in many media.Inconel X-750 Application range and field

1.Nuclear reactors

2.Gas turbines

3.Rocket engines

4.Pressure vessels

5.Aircraft structures

Inconel X-750 Chemical composition

Alloy	%	Ni	Cr	Fe	Nb	Co	C	Mn	Si	S	Cu	Al	Ti
Inconel X-750	Min.		14	5	0.7							0.4	2.25
	Max.	70	17	9	1.2	1	0.08	1	0.5	0.01	0.5	1	2.75

Inconel X-750 Physical properties

Density	8.28 g/cm3
Melting range	1393-1427°C

Inconel X-750 Alloy m inimum Mechanical properties in the room temperature

Alloy	Tensile strengthRm N/mm2	Yield strength  RP0.2N/mm2	ElongationA5 %	Brinell hardness HB
Solution treatment	1267	868	25	≤400