Welcome to ECOL - Join Free - Sign In
Creasing Matrix (Pressboard Creasing Matrix, adhesive creasing channel)
Creasing Matrix (Pressboard Creasing Matrix, adhesive creasing channel)
Supplier Info
[China Supplier]
Contact Person : Mr. Ni Francois
Tel : 0086-21-20232967
Fax : 0086-21-51564107
Product Detail
Creasing Matrix (Pressboard Creasing Matrix, finger lift creaisng matri) Accurate position for good creasing effect pressboard

Adhesive Creasing Matrix.

1. For die cutting . 2. Different size available. 3. Two different material :plastic and pressboard

Adhesive Creasing Matrix

Specifications:

Material: plastic,Pressboard.

Size:0.2*1.0mm,0.3*0.6mm,0.3*0.8mm,0.3*1.0mm,

0.3*1.1-1.7mm,0.4*0.6mm,0.4*0.8mm,

0.4*1.0-1.7mm,0.4*1.9mm,0.4*2.1mm,

0.5*0.6mm,0.5*0.8mm,0.5*1.0-1.7mm,and etc.

Advantages:

1)Fast and exact matrix

2)Self adhesive steel based

3)Channel from hard plastic

Accurate positon ability, good glue material to ensure sticky ability

Complete range of size to ensure all kind of demand

Plastic material and pressboard material both available

Ordinary type and Finger lift type (for easy peel off the back)

Back width: normal 13mm or narrow 9mm

Length: 700mm/pcs

Material:

1. Plastic and

2. Pressboard (more durable)

Technique characteristics

      Brank quickly setting cteasing matrix, adopting advanced technology, and well making, is the rsult of years of technical innovation and practical application, enjoying a high reputation in the carton and box industry. Convenient handing and excellent quality make the creasing perfect..

A.Thickess of creasing matrix.B.Brute mighty bottom filmC.Channel width of creasing matrix.D.Locating plastic strip.E.Protection film. 

  
1.The amount needed to get the length of the indentation modulus 2.Indentation die cutting machine used incision, the indentation die cut into both ends of the natural 90-degree corner
  
3.Indentation with plastic mold on the position will be cut indentation in the card-mode version of the cutting line indentation4.To protect Indentation model glue off the bottom
  
5.Die-cutting machine to transfer the pressure well, and then die-board installed, and then switch on a cutting machine, that is, positioning mode indentation in the mold plate on the end of6.Indentation modulus tear on the positioning of plastic article
Paper weight (g)Thickness of the paperIndentation line height (mm)Indentation made common line
23.5023.4023.2023.2023.1023.0023.2422.9
2000.28mm0.3×1.00.4×1.0    0.5×1.0 
2500.35mm0.3×1.20.4×1.20.5×1.2   0.5×1.2 
3000.42mm0.3×1.30.4×1.30.5×1.4   0.5×1.4 
3500.50mm 0.4×1.40.5×1.50.6×1.5  0.5×1.5 
4000.56mm  0.5×1.60.6×1.6  0.5×1.60.8×1.6
4500.63mm  0.5×1.70.6×1.70.7×1.7  0.8×1.7
5000.70mm    0.7×1.70.8×1.7 0.8×1.7
Note: Specifications recommended only choice, as the first choice Specifications

Corrugated selected in the control (by beer-cutting knife to do a high standard 23.8mm)

CorrugatedAfter the compacted thicknessIndentation line heightSelection (1.05)Selection (1.42)
E-Hang0.65mm23.10mm0.7×2.3__________
E-Hang0.75mm23.00mm0.8×2.5__________
B-Hang0.85mm22.90mm0.8×2.70.8×3.2
B-Hang0.95mm22.80mm1.0×3.01.0×3.5
C-Hang1.05mm22.70mm1.0×3.21.0×3.5
C-Hang1.15mm22.60mm___________1.0×4.0
Related Products
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.