Welcome to ECOL - Join Free - Sign In
4kw IGBT high frequency induction welding/ soldering equipment
4kw IGBT high frequency induction welding/ soldering equipment
Supplier Info
[China Supplier]
Contact Person : Ms. Zhou Cheerfy
Tel : 86-755-27986108
Fax : 86-755-27986488
Product Detail
ultra high frequency induction heating low energy consumption high production efficiency easy operation environment friendl

4kw IGBT  high frequency induction welding/ soldering equipment

Model

DD-04

Maximum oscillating power

4KVA

Input voltage scope

180-245V

Input voltage frequency

50HZ-60HZ

Output oscillating frequency

100KHZ-250KHZ

Heating/retain current

100-400A

Heating/retain/cooling time

1S-99S

Duty cycle

100%

Cooling water flow

0.2Mpa >4L/MIN

Cooling water temperature

<45°C

Weight

20Kg

Performance:

1. Adopt advanced high quality MOSFET pipe and advanced frequency conversion technology to improve performance and quality of the device.

2. Heating, heat preservation current, time can be set and adjusted.

3. Simple and convenient installation, can work after connecting to 220V power, water inlet, and water outlet, professional installation is not required.

4. Small shape, light weight, simple operation, can be learned within several minutes.

5. Contain the multi-level protection and display such as overvoltage, over-current, overheats, and water fail.

Application:

Woodworker uses hard alloy sawing blade welding tooth. The mental cutting uses hard alloy saw blade welding tooth.

Advantage comparing to resistor welding tooth:

1,high-efficiency and rapid welding tooth,1-5 second for each tooth.

2,Good repetition,each tooth has good repetition performance.

3,Rapid and equal heating can effectively prevent partial overheating of the saw tooth from brittleness and cracking and prevent non-full welding from losing tooth.

4,high rigidly saw tooth, some saw blades can not be welded by resistor.

RECOMMENDED DEVICE TYPE:

DD-04 type induction heating device--the device is cheap and is applied to most cases most of saw blades welding adopts the method of single side welding.

Others models:

Model 

DD-15 II

Max. osc. power

15KVA

Input volt. 

Single phase 220V-50-60HZ

Input volt. range

180V~245V

Output osc. frequency

30~100KHZ

Heating current 

200A~600A

Load duration rate

80%

Requirement for cooling water 

Water pressure ≥0.2Mpa   Flow: 2~5L/min.

Heating/ Cooling time

1~99 sec.

Weight

Main Machine:17.5KG

Sub-Machine: 15.5KG

Dimension

(W)20×(H)47×(L)50cm

(W)20×(H)35×(L)35cm

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.