1) Silane Cured LDPE for cable insulation 2) For low voltage XLPE cables 3) Suitable for normal PVC/PE extruders
YJG-10 is Silane Cured LDPE "Sioplas" Cross-linkable Polyethylene (XLPE) as insulation for 10KV and below Power Cables
Color: Natural
Specification as below:
Max conductor temperature: | 90°C |
Tensile Strength: | ≥ 13.5Mpa |
Elongation at Break: | ≥ 350% |
Brittleness temperature: | ≤ -76°C |
Ageing Properties (Test temperature 135°C, 168h) Max Variation of tensile strength: Max Variation of elongation at break: | ± 20% ± 20% |
Hot Set Test (200°C, 15min, 0.2MPa) Max elongation under load: Max permanent elongation after cooling: | ≤ 100% ≤ 5% |
Dielectric constant (20°C, 50HZ): | ≤ 2.35 |
Dissipation factor (20°C, 50HZ): | ≤1.0x10(-3) |
Volume Resistance (20°C): | ≥ 1.0x10(16)Ω.cm |
Dielectric strength: | ≥ 25Mv/m |