T8 SMD LED tue for replacement of traditonal tube.
Specification:Type T8-SMD
1.Item: LED tube light
2. Luminous Efficacy: 75~85 lm/W
3. Color Temperature: 2700~6500 K available for choose
4. CRI: >75%
5. Beam Angle:120°
6. Lumen Maintenance: >95%@1,000hours
7. Input Voltage: AC85-265V Frenquency:50/60Hz
8. Lighting Source: 3014 SMD LED,
9,.Operation Temperature: -20~40°C (-4~104°F)
10.Dimension: 300/600/900/1200*26MM
11.Housing: Aluminum+PC
12.Socket Type: T8
13.Work Environment: Indoor use (applicable for dry environment)
Type | Wattage | LED Qty | LED Type | Lumen | Size |
APL-T8-3102-9W | 8W | 88 PCS | Epistar SMD3014 | 650lm | φ26*600mm |
APL-T8-3102-12W | 12W | 132 PCS | Epistar SMD3014 | 950lm | φ26*900mm |
APL-T8-3102-18W | 18W | 176 PCS | Epistar SMD3014 | 1500lm | φ26*1200mm |
Parameters
Item No | APL-T8-3102 |
Tube type | T8 LED tube |
Dimention | L900*D26mm |
Color& Color temperature | Warm white(3000-3800K) Cold withe(5500-6500K) |
LED type | 3528 smd leds |
LED Quantity | 216pcs |
Working voltage | AC85-265V |
Light Efficiency | 70-90LM/W |
Luminous Flux | 800-1000lm |
Output power | 12W |
Material | Aluminium Alloy Shell + PC(Frosted) |
Power supply | Built-in Power supply(two side) |
Operation temperature | -20~+55° |
Power efficiency | 90% |
Power factor | 90% |
Color rendering index | Ra>70% |
Equal To Traditional Fluorescent Lamp | 28W |
Certification | CE,RoHS |
Features
1.Light source: super-bright 3528 SMD LED, emitting higher brightness at lower cost, the light looks nicer and safer, superior to traditional tube.2.Environmental friendly clear PC cover and aluminum sheet housing gives good heat management.3.Energy saving up to 80%.4.Color temperature can be offered as customer demands.5.No UV or RF interference6.Longer life than incandescent & fluorescents7.High intensity, low heat, no flickering 8.Mercury free, 80% savings in energy consumption,9.The products are in accordance with CE, RoSH testing standards
application
1 schools,house lighting 2 factory workshop 3 bus,metro, airport 4 supermarket, cinema, car park 5 government,military base
Installing
Caution:
1.LED tube and its all fittings cannot withstand any merchanical pressure.
2.Any question about the installation of our LED tubes,please ask for professional guide.
3.If the aluminum pipe is damages or deformed,please stop using the LED tube to avoid dangers.
4.Before installation,please switch off the electricity,and ensure to install our LED tube normally.
5.Please install or place the LED tubes to avoid sunlight and high temperature.
6.It is only used indoors.
About Liyin:
Zhongshan Liyin Led Lighting Co.,Ltd is a professional manufacturer deal led indoor&outdoor lights.
Do specially accept OEM&project lighting design.Sincerely hope can avail this oppotunity to start our cooperation.
Production
Welcome to your inquiry!Thanks