Using the most advanced integrated microcontroller and over-temperature protection device,it is unique in international market. FEATURES & BENEFITS 1. Thermostat hot melt glue gun heated by Nickel-chromium wire,bigger power,shorter preheat time,bigger flow of glue.Using the most advanced integrated microcontroller and over-temperature protection device,it is unique in the international market 2.Temperature display,control heat temperature from 100 °C TO 200°C by every 10 °C. 3.Operation indicators LED light,  4.Stop glue drip Valve, Effective to stop the glue drip/we promise our product qualityDetailed Product Description 

Applicaliton:

1.the toy model

2.Artifical flowers,christmas tree

3.Decorations,the metals product

4.the wood product,

5.Electronic circuit plak

Descriptions:

>Load one glue stick

>Heatting gun for few mins and pull the trigger

>Don't touch the nozzle and melted glue

>Keep away from Children.

>Must be used under supervision of adult during doing craft works.

>Power:230V, 50Hz, 20(200)W,

>volume:15g/min

Use methods of the glue gun :

1.Make sure that the working voltage was at the level of 230V.

2.Set up the holder,put the gun horizontal and the glue jet downward.

3.Insert the glue stick into the glue gun.(glue stick diameter 11.2mm available)

4.Connect with the power supply and pre-heat the glue stick for 3~5 minutes till it melt completely.

5.Pull the trigger slightly to let the glue flowing out.

6.Cut off the power supply when you finished the work

Voltage	230 V
Power	125 W
Preheat.time	2-3 minutes
Flow of glue	10-25 g per minute
Glue stick D.M.	11.2 mm
Item	FL-277C
Packing	Moulding case
Carton.Size	41x35x27.5 cm
Quantity per carton	6 PCS
G.W/N.W	13/12 Kgs
Quantity/20’container	4500 PCS

            

125W Nickel-chromium wire electronic heat glue gun