Introduction: ceiling filter for paint spray booth is made of super-long heat-welding and anti-breaking synthetic fiber and quality water soluble resin, and adopts various processing procedure, such as 3D glue dipping, thus ensuring high adhesion to small dust extremely; equipped with high-density cloth on air outgoing surface, it can absorb dust effectively, therefore ensures purification of the air and balance air flow in the whole working space
Due to complete penetration of viscosity in media, dust particles can not pass. Fully filtered air evenly spreads to form a laminar flow state to achieve the best spray results. Conforming to European DIN53438-F1 and American UL900-Class2The outlet side is printed with EN-779 standard classifications, DIN logo, the registered trademark of SHW.
Dense outlet side, low initial resistance, high dust holding capacity, good fire retardant and long working life, economical and reliable, the surface is reinforced by covered net scrim.Moisture resistance, up to 100% relative humidity
Type | Filter Class | Average Arrestance | Initial Efficiency | Nominal Velocity (m/s) | Rated Airflow (m3/h) | Initial Resistance (Pa) | Final Resistance (Pa) | Dust Holding Capacity (g/m2) | Continuous Temperature
Degree
| Instantaneous Temperature Degree | Thickness (mm) | Sizes |
SP-600G | F5 | 98% | 55% | 0.25m/s | 900 m3/h | 30Pa | 450Pa | 460 g/m2 | 100 Degree | 120 Degree | 22mm | 1.6*21M |
2.0*21M | ||||||||||||
SP-560G | F5 | 96% | 50% | 0.25m/s | 900 m3/h | 25Pa | 450Pa | 400 g/m2 | 100 Degree | 120 Degree | 25 mm | 1.6*21M |
2.0*21M | ||||||||||||
JE-600G | F5 | 98% | 55% | 0.25m/s | 900 m3/h | 30 | 450Pa | 460 g/m2 | 100 Degree | 120 Degree | 22mm | 1.6*21M |
2.0*21M | ||||||||||||
JE-560G | F5 | 96% | 50% | 0.25m/s | 900 m3/h | 25 | 450Pa | 400 g/m2 | 100 Degree | 120 Degree | 25 mm | 1.6*21M |
2.0*21M |
Note: Other specifications are available on request