Welcome to ECOL - Join Free - Sign In
FKM-DS2600
FKM-DS2600
Supplier Info
[China Supplier]
Contact Person : Mr. he Joy
Tel : 86-021-69005751
Fax : 86-021-69005752
Product Detail
FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is...

FKM-DS2600

 

Conformable with: Q/DYS 005-2007 FKM-DS2600 is copolymer of HFP and VDF. Normally it is white or light yellow translucent elastomer whose fluorine content is over 66%. After vulcanizing process, FKM products have excellent mechanical performance, outstanding anti oil property (fuel oil, synthesis oil, lubricating oil) and high thermal stability. Quality Specification
ItemUnitDS2601DS2602DS2603DS2604
-1-2-1-2-1-2
Appearance  white or light yellow translucent rubber piece 
Specific Gravityg/cm31.78-1.831.80-1.841.80-1.841.80-1.84
Mooney viscosity [ML(1+10),121°C] 10-2930-3940-6061-7980-100101-120121-200
Tensile strength, ≥Mpa11.011.011.511.5
Elongation at break, >%150150160160
After aging 24hr. at 270°C≥ Tensile strength,Elongation at breakMPa %9.0 1209.0 1209.5 1309.5 130
Compressive set, ≥ (270°C×24h, AF compression rate 30%)%25252525
Oil resistance (1# aircraft fuel, 200°C×24h, added weight), ≤%6666
Properties Low viscosity, excellcnt rheological propertiesModerate viscosityMiddle and high viscosity, good milling and calendaring performanceHigh viscosity, high gum strengthUltra-high viscosity
Application Additive of high Mooney rubber, O-ring, anti-extrution parts of productO-ring made by compression moulding, injection moulding and imjestion, extruded hoseCalendaring sheet, skeldtal oil seal, extruded hose, etc.General parts made by injection moulding, and oil seals, etc.Parts made by compression mouldiong, high strength vulcanized products.
 Main ApplicationsWidely used in high temerature, aviation, automobile, petroleum and chemical imdustries, oils lubricants, etc. Mainly used to produce gaskets, O-rings, V-rings, sealing bowl with metal bone, diaphragms, tube, valve-plate, rolls, etc. Attention1,Fluoroelastomer gum has good thermal stability below 260°C; It will minimally decompose when placed in the temperature of 260°C-300°C for a long time; When hither than 320°C, it will quickly decompose, and poisomous HF and fluorocarbon organic compound are produced; When it meets fire, it also release poisonous HF and fluorocarbon organic .compound.2,Attention: FKM shouldn' t be calandered with metal powder (such as AI and Mg) or animine compound more than 10%. If that happpens, emperature will arise and several element will react with FKM, which will damage the equipment and operators. Package, Transportation and Storage1,FKM is packed in PE bags, then packed in carton case, net weight: 20kg per drum.2,FKM should be stored in chean, dry and cool places. The product is transported according to non-hazardous chemicals. Avoid contamination, sunlight and water.3,Storage period is one year since production, when exceeding the shelf life, it still can be used as long as it is retested and approved.
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.