Welcome to ECOL - Join Free - Sign In
MDF & Solid wood flooring production line
MDF & Solid wood flooring production line
Supplier Info
[China Supplier]
Contact Person : Ms. xue Sherry
Tel : 0086-512-66520585
Fax : 0086-512-66520587
Product Detail
This automatic production line is mainly applicable to the continuous production of floor. Our all products have CE certificate

10+12 Laminated floor full lines of automatic production line

 Hotjin FPR, the tongue and groove type milling line of new-type solid floor and multi-layer wood (bamboo wood) composite floor is of automation during the whole process. The master machine is of track-through type with highly intensive U-shaped guide rail, which ensures the operational linearity and the synchronicity of double rails. This automatic production line is mainly applicable to the continuous production of floor. It features in advanced design, compact structure, easy utilization, intensive automation and reliable performance.

Including a full line of major equipment

A. Feeding Rolling Table (front) (GT24-1): Positioning separation, multi-sheet after a separation then a subsequent transportation to the next procedure.

B. Longitudinal Double End Tenoner (DTLF06-10D): A pair of vertical sheet molding, five of the 10 axis preparation. Since it can use pointless die-block, no scratch or damage will be made to the floor. Precision control for the level of bad 0.02-0.05 mm, straightness of 0.05 mm per meter.

C. Longitudinal Brushing Machine (SG-A): In vertical slotted right after brushing the surface of the work piece with ash.

D. Feeding Rolling Table (central) (GT24-2): Vertical processing will be completed sheet into the next process.

E. Automatism Feeding Rack (GT24-0): Right transportation to the plate in the precise location of a  single-chip stocks after separation into the next process.

F. Electrical Control System (GT.D): The coordination of the whole production line control.

G. Transverse Double end Milling Machine (DTS25-12D): The two ends of a pair of sheet molding. The elimination of the use of jump knife nap. Precision control for the level of bad 0.02-0.05 mm, straightness 0.05 millimeters per meter, vertical degrees of 0.05 mm / 100. Plate arrangement in accordance with the characteristics of the location of jump knife.

Please contact us if you have other special requirements or configurations.

MDF & Solid wood flooring production line

Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.