Fingerprint reader provide a standard wiegand26 or user-defined format to controller accept the wiegand 26 input

This Fingerprint Reader Features:

1. Capacity of the templates Standard version  600 templates  2. The version With in-built ID module:600/5000/8000 templates(three options)  3. The version with in-build Mifare module  Infinite capacity  4. Verification mode  Standard version  1:1 or 1:N, support only fingerprint  5. The version with ID card  When 600 templates, 1:1or 1:N, support only fingerprint,

card+fingerprint, only card

6. The version with ID card  When 5000/8000 templates, 1:1, support card+ fingerprint,Communication ways  TCP/IP as backup  Default IP address:192.168.1.201  RS-485  Default baud rate:38400

7. device number:1, port:COM1  8. Resolution  500DPI,Display  Indication  Power indicator,dual-color LED  9. Identification  Speed  speed<2 sec,Technical spec  FAR≤0.0001%, FFR≤1%  10. Alarm  Dismantle alarm  TTL (transistor-transistor logic) output for alarm  11. Configuration  Intel32bit processor, 2007 version algorithm  12. Power  12V DC, currency under idle status<50mA, wording currency<400mA  13. Operation environment  Temperature  0°C-45°C,Humidity  20%-80%  14. Size  130×58×62mm 

Hot sale products in our Company :

ELP-RF10 Fingerprint reader