Optical passive components testing Device
The JWD1100 series high stable light source are microprocessor controlled laser diode sources which can support the variety of emitters such as: DFB,FP,PUMP,SLED etc. It is specially used in passive components testing, power meter calibration and general laboratory uses.Featuresl
Provides 1~3 wavelength channels, any wavelength(s) can be optional
l High Stability and Reliability
n Stability: ±0.005 dB@15 min& ±0.05 dB@24 hour
n Accurate internal temperature control ensures the constant
n output wavelength and low bias.
l Output power can be adjustable, the range is among 5%~100%
n based on the maximum output power.
n JWD1100 adopts the digital adjustment of output power, to prevent
n the inconsistency bring from the potentiometers.
l Digital adjustment of laser emitter temperature
n JWD1100 supports the digital adjustment of laser emitter temperature,
n so that the user can do the slight adjustment for the wavelength when in necessary.
l Over temperature protection
n JWD1100 will cut off the laser emitter automatically and stop the work when the
n surrounding temperature over the limitation.
l Auto Fan Control
n JWD1100 can sensor the temperature through the internal transducer, and it will start
n once the temperature over the standard, this can increase the using life of the unit.
SpecificationsTYPE | JWD1100 | ||
Operating Wavelength(nm) | 850,980,1300,1310, 1480,1550, 1625 ect. | 1310/1550,1310/1480, 1480/1550,980/1550 etc. | 1310/1490/1550 or others |
Optical Connector | FC/APC(Other type adapters can be cusomized) | ||
-3dB Spectral Width(nm) | <0.1 | ||
-20dB Spectral Width(nm) | <0.5 | ||
Side mode suppression ratio(dB) | >35(DFB) | ||
Maximum Output Power(mw) | ≥1; ≥2; ≥5; ≥10 (others please specify) | ||
Output power stability in 15 minutes(dB) | ±0.005 | ||
Output power stabiltiy in 24 hours(dB) | ±0.05 | ||
Digital Internal Modulation | 1Hz~20KHz | ||
Digital External Modulation | 0Hz~20KHz | ||
TEC stability | ±0.01°C@15 minutes; ±0.05°C@ 24 hours | ||
Power Supply | 110V or 220V (50Hz~60Hz) | ||
Operating Temperature | 10~+50°C | ||
Storage Temperature | -10~+60°C | ||
Warm Up Time(hour) | 0.5 | ||
Dimensions(mm) | 280*260*120 | ||
Net Weight(kg) | 4.7 | ||
Remark: All specifications stated here are depend on DFB laser, Specifications like emitter types, central wavelength, output power on demand. |
MODEL | INCLUDES |
JWD1100 | JWD1100 High Stable Light Source, Power Supply Cord, Fuze, Instruction Manul and Cotton swabs. |