1.Life more than 6 years 2.Professional manufacture 3.Oil yield is 40%-55% 4. Environment protection

Waste Tyer Recycling Machine Component List-- Xinxiang xinda boiler container co., ltd

1.Pyrolysis reactor and inner tubes

2.as chimney

3.Gas tank

4.Condenser

5.Cooling tower

6.Smoke pipe

7.Oil pipe

8.Oil tank

9.Blower

10.Draft fan

11.Motor

12.Power controller

13.Gas collection

14.Vacuum tank

Output Products-- Used tire recycle machine

Efficient industrial pyrolysis is a process to treat the rubber,tyre and industrial plastic waste.

The output percentage and usage of the output products

FUEL OIL (40 to 45%)

The main oil product produced by our recycling application is the fuel oil that is wide used for industrial and commercial purposes.

CARBON BLACK (30 to 35%)

Carbon Black is the main product recycled by pyrolysis technology.Carbon black is used as raw material or main ingredient in many industries and the chemical structure of carbon black strengthens, lengthens the endurance, and improves the coloring features of the materials.

STEEL WIRE (10 to 15%)

Tyres contain steel wires and the amount ranges from 10% 15% of the total tyre weight. All of the steel present in the tyre can be detached after the pyrolysis recycling process is completed.

GAS (10 to 12%)

1.Non-Condensable gases arise during the recycling application which;

2.Has a higher calorific value compared to natural gas

3.Can replace natural gas and propane when stored

4.Can be used as energy resource in gas burners, also used in pyrolysis system

5.The amount of gas generated in the system is 12 to 15% of the total amount of recycled tyres and considering the 10 ton scrap tyre/day recycling capacity, the facility generates 1400 - 1500 m3/day gas which has an enormous energy potential when evaluated.

Features

1.Raw material (waste tyre/plastic,rubber) is cheap and easy to provide.

2.Each recycled ton of tyre preserves 10 tons of CO2 that is a major greenhouse gas.

3.The process can be applied to all rubber based materials.

4.The system creates an alternative source of energy to replace petroleum products and natural gas.

5.System gives the opportunity to governments and local administrations to deal with the waste tyre problem to a great extent.

6.System prevents the spread of diseases caused by waste tyres.

7.The process of Pyrolysis has duration of 4 to 12 hours, depending on the amount and type of tyre . During the process different vacuum values are applied in pre-determined temperatures and in different phases different gases are obtained and the condensed gas is stored as fuel-oil in tanks.

Quality

1.100% waste tyre recycling is achieved (no churn left after the process).

2.No chemical ingredients are used in process (environment friendly).

3.During and after the process; no soil, water or air pollution is observed.

4.Creates economically valuable products out of waste (all of the products are industrial raw materials that have a market value)

5.The most cost-effective waste tyre recycling technology in the world.

used plastic recycle machinery made in China