Ads by Google
PLC, Programmable logic controller,Integrated PLC+HMI XP Series XMP3-18R
1,Reasonable price and high quality2, Well sold in the market3, CE RoHs certification
Performance & Features
This intelligent controller, adopting function block programming, having large programming capacity, being f reely fprogrammed according to different users and different fields, can run at your desired time table and the RTC accuracy can reach second and makes your time control more accurate. And up to 128 time sessions can be set , especially suitable for time-control system. Safety password function makes your program absolutely safe. Before writing program, password can be set. And only after entering the correct password, can the program be modified. It is equipped with a removable, convenient and programmable LCD, providing 64 friendly human-machine interfaces, 32 virtual keys, having the function to display the alarming message and parameter and to modify the parameter. When needed, it can be installed. And when not needed, it can be removed and replaced with an ordinary front panel. Thus the cost will be greatly reduced. The input can receive not only the digital input but also the analogue input to perform the control and . transmission of fthe temperature, moisture, pressure, flow level unit and so on. It has well-featured and compact design with 8 point input and 4 point output. Equipped with expansion module, it can be expanded into 82 I/O better ,and to MAX 122I/O.It can be connected with telephone voice module and remote control module to perform the notification and alarming function. And the connection between the host and the module can be Bridge SR-CBA or flexible connection SR-ECBA. The machine has short-circuit protection (internal) and relay output protection (external) function, which makes your usage safer and easier.
superiority
1) Control the switch quantity and set data directly on the panel2) LCD Display: 192*64 pixels (3.7"), up to 500,000 hours life3) 26 function keys can be defined freely4) Support touch function
Product Description
XMP3-18R XMP series Integrated PLC & HMI, owns the same functions as XC3 series, display area can be touched Digital input: 10 points/optical couple isolated Digital output: 8 points/relay Easy edit, abundant functionsv LCD display: 192× 64 pixel(3.7inh); Use life up to 500, 000 hours Functional keys up to 26 Delicacy and precise keys Use the same cable to Compile for HMI and PLC IP65 Compact configure, save more space
| Input voltage | DC12V-DC24V |
| Current Consumption | Less than 10W (TYP2.0W) |
| Allowable Momentary Power-cut | Less than 20ms |
| Voltage Endurance | AC1000V-10mA 1 minute (signal and ground) |
| Insulated Resistance | DC500V-about 10MΩ (signal and ground) |
| Operation Temperature | 0~50 C degree |
| Storage Temperature | –10~60 C degree |
| Ambient Humidity | 20~85%(Non-condensing, dry bulb) |
| Vibration Resistance | 10~25Hz(X,Y,Z directions for 30 minutes 2G) |
| Interference Rejection | Noise voltage: 1000Vp-p |
| Atmosphere | Free of corrosive gas |
| Protect Configuration | IP65F |
PNP outout.
XMP3-18PRT with clock integrator of PLC & HMI