Ads by Google
Acrylic solid surface made kitchen countertops, table tops, bathroom basins, vanity tops, kitchen sink, bathtubs, shower trays, shower panels, and other applications for residential and commercial use.
As one of the biggest manufacturer of Acrylic Solid Surface material in China, we are producing various kinds of acrylic solid surface products such as Pure Acrylic Solid Surface Sheets, Blended(modified) Acrylic Solid Surface Sheets, Solid Surface Kitchen Sinks & Countertops, Solid Surface Vanity Tops & Washbasins & Bathtubs, and other fabricated products like shower panels, shower trays, shower walls, etc. We have the most advanced production line and the most experienced fabricators in China. We can meet your special size or color requirments on the sheets and special design requirements on the finished products. We have more than 10years export experience, we have more than 200 remarkable colors for different interests all over the world. We export to more than 50 countries and our main market now is Europe and USA.
User’s Guide
1. Do not put objects with high temperature on the bathtub directly or for a long time.
Although the bathtub is heat-resisting, its surface will still be damaged under too high a temperature. Kettles containing boiling water or other objects with too high a temperature are likely to cause damage to the surface of the bathtub.
Please control water temperature of the water in the bathtub or the water being poured into the bathtub under 50 C.
Caution: Do not pour water with too high a temperature directly into the bathtub.
2. Spots caused by scratching, common chemicals, burning and slight knocks.
Spots caused by nicks, scratching and burning are unavoidable for frequently usedthe bathtub. However, sincethe is solid from inside to outside, the spots can be removed by using the following methods:
Spots caused by scratching, common chemicals, burning and slight knocks can all be removed by using Scotch brand cleaning pad. Slight sanding is necessary for severer damages, and the following steps are needed:
1) Wash the surface with clean water to ensure it is dustless.
2) Use 600 # waterproof abrasive paper to sand the surface, and then use 1000# abrasive paper to polish the surface.
3) Wipe away the water with a piece of dry cloth.
4) Moisten the surface first to avoid dirt.
Note: Must keep the surface wet while sanding it.
3. Keep the surface dry
Water contains large amounts of bleaching agents and incrustation. Therefore, it will affect the color and appearance of the bathtub of it stays on the surface for a long time.
4. Keep the surface away from strong chemicalsLITHOCAST is damage-resisting, but strong chemicals are not allowed to contact its surface. Paint-removing detergents, metal cleaning detergents, stove cleaning detergents, methylene chloride, acetone (like nail enamel remover) and strong acid detergents shall be avoided.
If the surface contacts the above-mentioned detergents, please immediately wash it with soap water.
If the surface is spotted by nail enamel, please clean it with acetone free detergents and then wash it with water.
1) Protect the surface from being knocked by overweight or sharp-ended objects.
2) Product renovation
In case the bathtub surface is scratched or tarnished due to long time of use, please ask professionals to polish the surface, which will restore its original look.
LITHOCAST is damage-resisting, but strong chemicals are not allowed to contact its surface. Paint-removing detergents, metal cleaning detergents, stove cleaning detergents, methylene chloride, acetone (like nail enamel remover) and strong acid detergents shall be avoided.
If the surface contacts the above-mentioned detergents, please immediately wash it with soap water.
If the surface is spotted by nail enamel, please clean it with acetone free detergents and then wash it with water.
1) Protect the surface from being knocked by overweight or sharp-ended objects.
2) Product renovation
In case the bathtub surface is scratched or tarnished due to long time of use, please ask professionals to polish the surface, which will restore its original look.