Brass Clad Steel Coil
1. Material: T2 Copper
2. Thickness: 0.2mm - 2.5mm
3. Width: no more than 600mm
Brass Clad Steel Coil Specifications of Brass Clad Steel Coil 1. Thickness (δ): 0.2mm - 2.5mmTolerance of Thickness (Δ1): δ≤0.5mm, Δ1=0.04mm1.0mm≥δ>0.5mm, Δ1=0.06mmδ>1.0mm, Δ1=0.08mm2. Width (w):T2(copper): w≤580mmH65(Brass): w≤450mmTolerance of Width (Δ2): w≤200mm, Δ2=0.5mm400mm≥w>200mm, Δ2=0.8mmw>400mm, Δ2=1.0mm3. Specification:For Coil:Inner Diameter: 508mm/250mm/100mmOutside Diameter: no more than 1400mmFor Sheet: Length: 450mm~800mmProperty of Brass Clad Steel Coil
Temper | Tensile Strength(N/mm2) | Elongation (%) | Feature |
TM | ≥280 | ≥45 | Excellent Ductility, suitable for deep stamping |
M | ≥290 | ≥33 | Good Ductility, suitable for general stamping |
Y2 | 350 - 450 | ≥5 | Used to manufacture bending parts |
Y | ≥460 | - | Used to manufacture simple bending part |
TY | ≥650 | - | High Strength and Flexibility |
Manufacturing of Brass Clad Steel Coil We use sand paper to polish the surface of Brass and steel. Then, mill imposes 130T pressure on the brass and steel to make them cohesive. Next step is the anneal procession, in which big annealing furnaces are applied. Finally, slitting machines slit large coils into the strips you want.Testing Equipment for Brass Clad Steel Coil We have a professional testing center where is settled with advanced equipment to analyze properties of copper steel, such as Rockwell hardness tester and peel force tester. Packaging of Brass Clad Steel Coil Coils are put into the plastic bags first then waterproof paper closely wraps the coil. In case of wet during the long journey, we put desiccant in the outside plastic package. Applications for Brass Clad Steel Coil 1) Bullets2) Cartridges3) Electronic stamping4) Electronic hardware5) Decoration 6) Radiators7) Drawing parts8) Covering parts 9) Connectors10) Heat Exchanger