Specification of Nickel-Copper Tube: 1) Grade: Monel:Monel 300,Monel 400,Monel R405,Monel K500 Inconel:Inconel 600,Inconel 625,Inconel 690,Inconel 718 ,Inconel 750 Incoloy:Incoloy 800,Incoloy 800H2) Diameter: 10mm-55mm3) Wall thickness: 0.5mm-3mm4) Length: 1000mm-8000mm5) Temper:Soft, Half Hard ,Hard
Ni(+Co) | C | S | Cu | Mn | Fe | Si | |
Monel 400 | ≥63.0 | ≤0.3 | ≤0.024 | 28.0~34.0 | ≤2.0 | ≤2.50 | ≤0.5 |
Monel K500 | 63.00~70.00 | ≤0.25 | ≤0.010 | Rest | ≤1.50 | ≤2.00 | ≤1.00 |
ZN | Al | P | Ti | Co | Sn | Pb | |
≤0.02 | 2.00-4.00 | ≤0.024 | 0.25-1.00 | Rest | ≤0.006 | ≤0.006 |
More detailed imformation as the following table:
Grade | Temper | Section Size (mm) | Length | |
Outer Diameter | Wall Thickness | |||
CuNi30Mn1Fe (C71500) | Soft | Φ12 ~ 55 | 0.75-3.0 | 1000 ~ 8000 |
Half Hard | Φ10 ~ 50 | 0.75-3.0 | 1000 ~ 8000 | |
Hard | Φ10 ~ 50 | 0.75-3.0 | 1000 ~ 8000 | |
CuNi10Fe1Mn ( C70600 ) | Soft | Φ12 ~ 55 | 0.5-3.0 | 1000 ~ 8000 |
Half Hard | Φ10 ~ 50 | 0.75-3.0 | 1000 ~ 8000 | |
Hard | Φ10 ~ 50 | 0.75-3.0 | 1000 ~ 8000 |
Shanghai Metal Corporation also provides Nickel-Copper Tubes and Rods which are made from special Monel Alloy.
Grade | ISO | ASTM | BS | DIN | UNS |
Monel | Monel 300 | A494 | --- | --- | --- |
Monel 400 | B127/163/164/165 | NA 13 | 2.4360 | N04400 | |
Monel R405 | B164 | --- | --- | --- | |
Monel K500 | B865 AMS 4676E | NA 18 | 4375 | N05500 |
Features of Nickel Copper Tube :
1) High toughness 2) High strength 3) High stability 4) Excellent elasticity with fine silver gloss 5) Good fatigue6) Rust and corrosion resistance properties 7) Good deep-drawing performance
Applications of Nickel Copper Tube : 1) Shielding material for communication electronics2) Antenna material3) SEMI-shielding material4) Spring contact5) Flexible terminal6) Environmentally-friendly plating-free electronic parts and components7) Quartz oscillator 8) High-level material and electric material.9) Aerospace industry10)Chemical equipment
Monel 400 1) Seamless water and steam pipe in factory2) Exchanger and evaporator for sea3) Crude distillation4) Manufacture of pumps and valves used by the production of hydrochloric acid equipmentMonel K5001) Turbine blades and gas turbine blades on the manufacture of aircraft engine , operating temperature below 750 °C2) Fasteners , springs used in the manufacture of ship3) Pumps, valves parts used in Chemical equipment4) Squeegee blade on the paper making equipment