DZR Brass ingost in continuous casting:
1.Cu 62.0~63.0
2.DIN EN 1982:2008
3.High polishing, fine grainDD
DZR Brass ingots Ms63EZB (Gkms63).Dezincification-resistant brass, DIN EN 1982:2008, CB752s.Continuous casting brass ingot with high quality, no impurities, less oxide end of production.Composition as below:
% | Cu | Pb | Fe | Ni | Mn | Al | Sn | Zn | Si | As | Cr |
min | 62.0 | 1.50 | 0.03 | < | < | 0.30 | < | | < | 0.1 | < |
max | 63.0 | 2.40 | 0.20 | 0.20 | 0.02 | 0.50 | 0.20 | rest | 0.02 | 0.12 | 0.02 |
Ms 63EZB special alloy for brass casting parts, e.g.fittings,constructions parts,sanitary appliances with different wall thickness and high demands on the surface processing. This alloy is preferably used in low pressure die casting, but gravity casting is also suitable. Additionally construction material with corrosion and dezincification resistance in chlorinated water.our portfolio is strongly focused on our customer's individual wishesMore detail:
Mateiral | Designation according to EN1982:2008 | Casting process and designation | Tensile strength N/mm2 | Proof strength Rp0.2 N/mm2 | Elongation A5 | Brinell Hardness HBW |
brass | CB752S | Permanent Mould-GM Pressure die casting-GP | 280N/mm2 | 120N/mm2 | 8% | 70HBW |
DZR brass ingots Ms63 EZB