Ads by Google
Household AC Contactor JCH1-25
Application
JCH1-25 household AC contactor is mainly used in the circuit of AC 50 (60) Hz, rated voltage is up to 230V, and rated current is up to 25A, and it is to control the low-induction and micro-induction load of household electrical appliances or etc.
It also can be used to control the household motor load (on this occasion, the control power should be low correspondingly.
Standard
China: GB 17885 International: IEC 1095
Normal Work and Installation Condition
1 Normal work condition
1.1 Ambient temperaturea) Ambient temperature +40, And within 24h the average temperature dont up +35. b) Ambient temperature -5.
1.2 AltitudeInstallation cant up 2000m.
1.3 Atmosphere condition
1.3.1 Humidity Max. +40, the air relative humidity cant up 50%, In lower temperature allow higher relative- humidity. Example: +20 the relative humidity is 90%, Due to temperature changes arising from the dual Lok Gel should take steps.
1.3.2 Pollution grade: Grade II
2 Installation conditions
a) The contactors and the installation of a vertical tilt of the face > ±5.
b) Din Rail 35.
Product Characteristics
Such products have characteristics of novel structure and small size (It has 2NO or 2NC contacts within 18mm width), so it is a special household AC contactor. Its enclosure takes recyclable high temperature insulation material. It also has characteristics of beautiful shape, convenient installation, no noise, so it belongs to modular terminal product. It can be equipped with MCB to be installed in the control and illumination box, which is applied in the following occasions, such as hotel, hospital, house, and so on.
Operation Cycle Times: ≤30000 times
Protection: IP20
More informations please kinldy visit site for Contactor