Copper-specific Extractant N910
1. Properties:
yellow or amber-coloured liquid, no visible impurities
2.Specification:
Item | Index | |
Density (25οC) | 0.95--0.99 | |
Viscosity (25οC) | 10CP | |
Flash Point (T) | >200T | |
Solubility of Copper Complex | ≥40g/l Cu | |
Extracting Kinetics (25οC) % | 30s | ≥95% |
Back-extracting Kinetics (25οC) % | 30s | ≥90% |
Maximum Copper Load Capacity | <100 g/l Cu | |
Back-extracting Isotherm Point (25οC) g/l |
Organic Phase
|
≤0.10
|
Time of Phase Seperation(s) | Extraction | ≤120 |
Back-extraction | ≤ 90 |
3.Uses:
It is a kind of copper-specific extractant, usually used to extraction of copper from ammoniacal lixivium, which can come from printed circuit, copper junk, copper alloy, copper/ lead scum.
Since viscosity for N910 is very low, Cu content can be reached 35g / L for 35°C(V/V) organic phase load capacity, therefore smaller solvent extraction system compared with oximes extractant can be used.
Organic phase load capacity can be back-extracting by low-acid high-copper solvent, it can be meet different needs for operators to recovery of copper from rich copper back-extracting solvent .
4.Package: 200 kgs plastic-lined iron barrel.
5. Storage and transportation: Handle with care,no vigorous strike is permitted.Deposite in shady, ariy and dry warehouse,keep away from fire and rain.
Copper-specific Extractant N910