Welcome to ECOL - Join Free - Sign In
5a molecular sieve co2 absorbent
5a molecular sieve co2 absorbent
Supplier Info
[China Supplier]
Contact Person : Ms. Miao Angie
Tel : 86-799-6322919
Fax : 86-799-6322319
Product Detail
molecular sieve desiccant 5a 1.Higher efficiency of drying 2.Drying natural gas 3.Removing moisture

 

molecular sieve desiccant (pellet and sphere shape)

 

Introduction: Molecular Sieve type 5A is an alkali alumino silicate; it is the calcium form of the Type A crystal structure. The pore size of 5A molecular sieve is about 5 Å . It can adsorb all kind of molecular smaller than this size, it is mainly used in separation of the normal and isomerous alkane; pressure swing adsorption (PSA) for gases; co-adsorption of moisture and carbon dioxide.

 

Application:

Will absorb, in sequence of absorption rate, C3-C14, C2H5CL, C2H5Br, CH3L, C2H5NH2, CH2CL2CH2Br2, CHF2CL, CHF3, CF4, (CH3)NH2, B2H6CF2CL2, CHFCL2, and CF3CL.

Main adsorbing target are carbon dioxide and moisture and it can adsorb all the material whose molecular diameter is less than 5A.

1)  Normal paraffin separating process

2)  Oxygen/hydrogen PSA (Pressure Swing Adsorption) process

 3)  Ethanol refinement (moisture, CO2, etc.)

4)  Refining SF6 refrigerant for power (removing moisture and hydrocarbon)

 

Formula: 0.7CaO·0.30Na2O·Al2O3·2.0SiO2 · 4.5H2O

 

Technical parameter:

Item

Unit

Target

Shape

 

pallet

Sphere

Diameter

mm

1.5-1.7

3.0-3.3

2.0-3.0

3.0-5.0

Size ratio up to grade

% min

98

98

96

96

Bulk density

g/ml min

0.68~0.75

Wear ratio

% max

0.20

0.25

0.20

0.20

Crushing strength

N min

30/cm

45/cm

30/p

60/p

Water adsorption

% min

21.5

21.5

21.5

21.5

N-hexane adsorption

% min

14

14

14

14

Packing water

% max

1.5

1.5

1.5

1.5

This is the typical parameter for type 5A molecular sieve, different application require different technical parameters, please contact us for detail.

 

Regeneration

Molecular Sieve Type 5A can be regenerated by pressure swing or purging, usually at elevated temperatures. The purge gas temperature must be sufficiently high to bring the molecular sieve to a level of 200°C - 300°C. A properly regenerated molecular sieve can produce water dew poins below -100°C and CO2 or H2S levels below 2 ppmv.

 

Attention: Do not unpack the goods until using, avoid of exposure in air for a long time.

  

 

Related Products
Ads by Google

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECOL Limited and/or its subsidiaries and licensors. All rights reserved.