Features:
1. Has a look & feel similar or better to carbon fiber bonnet and hard-top
2. Can be applied on interior and exterior surfaces of a car (hoods, trunks, side view mirrors etc.
3. Can be applied easily on all the common car paints
4. Cost-effective and can be cleaned with detergent and water.
5. Without residual glue on the car after remove
6. Service life for outdoor upto 4 years, indoor upto 12 years
7. Adhesive backing with air release technology for a bubble free installation
Installation Tips:
1. Cleaning the surface with rubbing alcohol prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
2. Using a heat gun can aid in the installation by making the vinyl more pliable and also help remove wrinkles.
3. Using a soft rubber squeegee will help smooth out bubbles and wrinkles
Application:
Carbon fiber modification on engine hood, empennage, surrounding surface, car handle, rotary plate, etc.
It's the desire of car fans.
Specification:
Film: 140micron PVC( meets ROHS).
Adhesive: 30u permanent clear( meets ROHS)
Rang temperature: -15c to +150c
Stretching of product: 26 to 33 pascal
Release paper: 120gsm air free bubbles single PE white paper.
Durability: Indoor 5-6 years; outdoor: 4 years.
Compatibility: Die cutting / car decoration/ architectural decoration.