Ads by Google
Description:
The camera light is formed by 300 LED light beads of extra-large luminous chips, its brightness can completely satisfy the use requirement under various environments; by adopting the encoder digital dimming mode, the camera light has accurate and reliable dimming and will not lead to the undesirable effects such as light shaking after using for a long time; besides, the camera light also has powerful functions of automatically controlling the brightness, remotely controlling and adjusting the brightness wirelessly, etc.
I. Product Structure1.Reflector;2.LED Bead;3.Front IR Receiver;4.Handle;5.Battery lock catch;6.Adjusting Screw;7.Hot Shoe Fastening Knob; 8.Metal Hot Shoe Base;9.Mini-type base;10.Functional indication lamp; 11.Sensor;12.Post-position infrared receiver;13. Power switch/brightness adjusting rotary button;14. Manual/automatic mode switch pushbutton;15. Electric quantity testing pushbutton;16. “SOS International Distress Signal” switch pushbutton;17. Fine-adjusting switch pushbutton;18. Brightness indication lamp.
II. Product Features
1. YN300 adopts 300 high-quality LED light beads of extra-large luminous chips, the brightness is higher, the light spot is more uniform and the service life is longer.2. YN300 adopts the encoder digital dimming and can distinguish the rough dimming and fine dimming modes; therefore, the use is more convenient. 3. A built-in light sensing chip can automatically adjust the brightness of the camera light according to the environmental light intensity.4. The infrared remote controller is configured, thus the brightness and the switch can be adjusted in off state.5. The professional LED driving chip is adopted, the light is stable and the efficiency achieves 93%.6. The camera light can be mounted on the camera as well as used by a handle.7. Four color temperature plates are configured and suitable for using under different environments.
III. Method of Application
1. Battery Installation When the lithium battery is mounted, the battery is mounted to a card groove according to the arrow direction.Compatible Batteries: SonyNP-F series NP-F750;NP-F550;NP-F950/B;NP-F530;NP-F970;NP-F970/B;NP-F570;NP-F770;NP-F960;NP-F930;NP-F930/B;NP-F950;NP-F330.2. Camera Lamp InstallationFirst fasten the lamp base to the bottom of the product with the adjusting screw and then adjust the angle of the lamp as needed.3.The camera lamp can be fastened as follows as needed.a. To SLR/Camera Hot Shoe (1)Screw the Hot Shoe Fastening Knob to the top in the direction of the arrow)(2)Insert the lamp into the camera/camera hot shoe base in the direction of the arrow)(3)Tighten the Hot Shoe Fastening Knob in the direction of the arrow)b. To Attached Mini Base Put on the Desktop or Other Flat Surfaces.(1)Screw the Hot Shoe Fastening Knob to the top in the direction of the arrow)(2)Insert the metal hot shoe into the mini base in the direction of the arrow)(3)Tighten the Hot Shoe Fastening Knob in the direction of the arrow)c. To Lamp Holder/Tripod(Take out the quick release plate) (Fasten the mini base to the quick release plate) (Fasten the camera lamp to the tripod)d. To the Attached Handle(Fix the handle to the camera lamp) (Fasten the camera lamp to the lamp holder)4. Start-up and manual mode a.press the power switch and light the LED camera light; rightwards rotate to increase the brightness, or leftwards rotate to reduce the brightness;(Brightness is adjusted by left and right rotations)b. switch to fine-adjusting mode through C Fine pushbutton so that the brightness regulation is very fine; the camera light can satisfy your higher adjusting requirement. 5. Automatic modeM Auto pushbutton is slightly touched, thus the mode is switched to the automatic mode; under the automatic mode, the brightness indication lamp is circularly lighted, the camera light can be automatically adjusted according to the environmental brightness. (Note: under the automatic state, the brightness cannot be adjusted manually and the camera light cannot be remotely controlled) 6. Test of electric quantity Bat pushbutton is slightly touched, electric quantity indication lamps are lighted in order; the displayed quantity is the rest available electric quantity, (Note: the rest electric quantity of test when the brightness is low is different from that of the test when the brightness is high, the service life is tested under the current brightness)7. Special application----“SOS International Distress Signal” SOS pushbutton is pressed, thus the functional indication lamp lighted at the left side is -“SOS International Distress Signal”; the functional indication lamp lighted at the right side is “Signal of Needing Help”; two indication lamps are lighted at the same time, which means “Distressed Signal Received”V. CT FiltersThis product comes with 4 CT filters. Simply insert the CT filters into the slot on the side of this product to meet your requirements in different environments. VI. Remote Control Modea. The multifunctional IR remote control complete with this product can adjust, turn on or off the luminance of this product. Aim the remote control at the front or back of this product which is equipped with one IR receiver respectively to adjust the luminance at a remote control distance greater than 8 meters.b. The multifunctional IR remote control can also control Canon, Nikon, Sony and Pentax SLR with infrared reception
VI. Product Specification
Light Source | 300 LED beads | Luminance Angle | 55° |
Color Temperature | 5500K | Average Service Life | 50000 H |
Color Rendering Index | ≥90% | Remote control distance | ï¼8 M |
Power | 18W | Weight | 725g |
Lumen | 2280 LM | Size | 173*153*43 |
| |||
Suitable for:
Almost all the SLR cameras camcorders,like Canon Nikon Pentax Olympus Samsung Panasonic JVC and so on.Except Sony (It need s hot shoe adapter to use the LED light).
Package included:
1* Camera Lamp YN300;1* Multifunctional IR Remoter ;1* Handle;1* Lamp Base;1* Storage Bag;1* Mini Base;1* User Manual in Chinese and English;4* CT Filter.