Ads by Google
Gypsum block hydraulic machine
(1)gypsum block production line adopts hydraulic machinery focus manipulation, not only saves the assistant time, improves efficiency, but also alleviates the workers of the labor force.
(2)the distribution of Roof, scraping , return and motion will take New digital display table,which use electric, hydraulic automatic memory
(3)Mechanical electric control using PLC, it has complete functions, high precision
(4)Feeding, stirring, in Automation programs
(5)Our production line will provide the best products and service to help the clients to improve production efficiency and product quality. To insight customers" practical demand ,with constant improve themselves to adapt and to meet customer needs , this is our service principle
Capacity/M2 | Specification /mm | Shaping Number(piece)/time | Shaping time/hour | ||
length | Height | thickness | |||
100,000 | 666mm | 500mm | (80-230mm) | 8 | 5-7 |
120,000 | 10 | 5-7 | |||
150,000 | 12 | 5-7 | |||
200,000 | 16 | 5-7 | |||
250,000 | 18 | 5-7 | |||
300,000 | 21 | 5-7 | |||
350,000 | 24 | 5-7 | |||
.
1 feeder (screw feeder or vertical feeder , anyone is ok,according to the customer's actual situation)2 the fully closed measuring mixing system (won't produce any pollution)3 gypsum block forming machine (won't produce any waste)4 catch plate system5 the manipulator (can palletizing 5 layers gypsum block, to save 4/5 area)6 other auxiliary equipment (control cabinet, hydraulic pressure station, etc.)
1. Product specification
1) Length: 666mm
2) Width: 500mm
3) Thickness: 80mm, 100mm, 120mm, 150mm, 180mm, 200mm
2. Annual capacity:
100,000 m2-350,000m2
3. Production process:
Metering and weighing section—The building gypsum is conveyed to weighing silo by screw conveyor, when the materials in weighing silo are up to the set value, the screw conveyor will stop conveying.
Forming section—The metered building gypsum is evenly conveyed to a mixer by a flash screw conveyor and the water is conveyed to the mixer by pneumatic valves. The evenly mixed slurry by the mixer will be poured into forming machine, the hydraulic scraper will scrape out the upper surface tongue-and-groove, then hydraulic jacking out the formed gypsum blocks, then space clamp will move blocks to drying kiln car or to be air-cured
Drying and air-cure section—Formed gypsum blocks can be removed moisture by sun or artificial drying which is at buyer’s option.
Packing and storage section—Kiln-dried gypsum blocks can be manually or mechanically packed which is also at buyer’s option.
4. Final product variety:
Hollow gypsum block
Solid gypsum block
5. Physical property:
1) average density: 800-1,100kg/m3±5(under dry conditions)
2) humidity 6% of maximum residual moisture
3) breaking resistance strength:
Thickness under Average Density | Average Load |
50mm | 1.7KN |
60mm | 1.9KN |
70mm | 2.3KN |
80mm | 2.7KN |
100mm | 4.0KN |
4) bending strength: minimum 2.5KN/m2(maximum bending moment: >=550Nm)
5) hardness: minimum 5MN/m2
6) wire-resistance: European A1 Standard
7) heat insulation: the heat insulation effect of gypsum block of 1mm thickness equals to brick of 3cm or cement of 4cm or concrete of 5cm.
8) the coefficient of gypsum heat conduction:0.34W/m.K
6. Fuel variety:
Coal, natural gas, diesel oil, heavy oil, ect.
7. Advantages:
1) Product quality: product quality is priority to the international standard JC/T698-1998 (equal to European Standard).
2) With a strong design team as the basis, we can supply equipments and production line with different configuration which are tailored to customers’ requirements. We guarantee whole-life service for our equipments.
3) We can offer a basket of services of design, producing, installation, commissioning and training, as well as turnkey project for customers
Gypsum block hydraulic machine