AM-8050 Straw Baler
Introduction
AM-8050 straw baler is widely used in collecting and bundling dry and green grass, straws, wheat stalk, corn stalk etc. It is convenient for transportation, reserve and seep processing. This item is suitable for four-wheel tractor of 18-30 hp. This machine is composed of picking system, rolling system, threading system and bale locating system which bales the soft culm and grasses(rice straw, wheat straw, grass, corn stalk etc.) automatically.
Advantages
1. Simple structure, durability, safe, easy to use and maintain, with the high rate of bander, big
density, it is widely used in the animal husbandry, paper industry, and the purchase and storage
and transport of the wheat straw and pasture.
2. This machine can improve the safety degree of the stock ground, after packing, it can decrease
the possibility of fire disaster, and not easy to fever, spontaneous combustion, even the foreign
flame lit, it is not easy for combustion.
3. It is easy for storage, will save 67% of the area of the meadow after packing the straw.
4. It is convenient to load and unload and transport, it can make full of the means of transport
Capacity. Generally speaking, it can improve the transport capacity 2-3 times, and can save
more than 50% of the labour and transport cost, it solve the problem of unsafe factors.
Working procedure
The Power conveyer driven shaft release the power to bundling machine's power-input shaft through universal drive shaft when drive the chain,chain sprocket,and rotary platen system and picking system.The hydraulic power out driving joint control the cylinder piston to enable the bale putting.The baling machine is already adjusted into the suitable height.When the machine is going along with the tractor,the hay is picked into rotary platening chamber and rotating biger and biger ,then get into very tight round bale.When the density of the bale is ok ,the alarming system will start to sound,driver should stop forwarding,push the threading clutch.When find the speed of threading is faster,loose clutch,keep the Power conveyer driven shaft working to start thread.Driver should pull the hydraulic controlling stick to change the direction of the hydraulic valve,then the cylinder will work and throw the bale out.After throwing the bale out,correct the hydraulic valve,open rear rack to forwarding again for the second cycle.
Specification
Model | AM-8050 |
Driving mode | PTO |
Power Match(hp) | 18-30hp |
Overall dimension | 1235*1490*1575mm |
Picking width | 800mm |
Working speed | 3-5km/h |
Weight of bale | 15-20kg |
Size of bale | Φ500×800(mm) |
More Pictures for Reference