Type 1   

1.    Pure rubber, with no reinforcement

2.    Section width     10.5mm

3.    Section height     12mm

4.    Inflation pressure     60~80kPa

5.    Maximal sealing gap     5mm

6.   We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold. 

Type 2

1. Pure rubber, with no reinforcement

2. Section width     16.4mm

3. Section height     12.5mm

4. Inflation pressure     60~80kPa

5. Maximal sealing gap     5mm

6. We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold. 

Type 3

1. Pure rubber, with no reinforcement

2. Section width     16.4mm

3. Section height     12.5mm

4. Inflation pressure     60~80kPa

5. Maximal sealing gap     5mm

6. We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold. 

Type 4

1.    Seal consists of inner and outer rubber ply and fiber reinforcement.

2.    Section width     17.6mm

3.    Section height     13.5mm

4.    Inflation pressure     180~220kPa

5.    Maximal sealing gap    8mm

6.     We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold. 

Type 5

1.    Pure rubber, with no reinforced layer

2.    Section inner diameter     16mm, outer diameter     22mm

3.    Inflation pressure     100kPa

4.    Maximal sealing gap     5mm

5.     We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold. 

Type 6

1.    Seal is made of inner & outer rubber ply and fiber reinforcement.

2.    Section width     20mm

3.    Section height     10mm

4.    Inflation pressure     180~220kPa

5.    Maximal sealing gap     5mm

6.     We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold.

Type 7

1.    Seal is made of inner & outer rubber ply and fiber reinforcement.

2.    Section width     24.5mm

3.    Section height     20mm

4.    Inflation pressure     180~220kPa

5.    Maximal sealing gap   8mm

6.     We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold.

Type 8

1.    Seal is made of inner & outer rubber ply and fiber reinforcement.

2.    Section width     20mm

3.    Section height     10mm

4.    Inflation pressure     180~220kPa

5.    Maximal sealing gap    5mm

6.     We can machine any length of seal perimeter according to the customer’s request, and not need to machine a new mold.

Type 9

1.    Seal body is fluoro-rubber.

2.    Section width     30mm

3.    Section height     34mm

4.    Inflation pressure     100~120kPa

5.    Maximal sealing gap   3mm

Type 10

1.    Seal body is abrasion resistant rubber

2.    Section width     38.6mm

3.    Section height     18.8mm

4.    Inflation pressure     300kPa

5.    Maximal sealing gap    3mm

6.    specification available     φ922×980.

Type 11

1.    Seal body is abrasion resistant rubber

2.    Section total width     41mmsealing surface width     16mm

3.    Section height     24.5mm

4.    Inflation pressure     200kPa

5.    Maximal sealing gap     3mm

6.    Specification available     φ500×582

Type 12

1.    Seal body is abrasion resistant rubber

2.    Section total width     6mm

3.    Section height     30mm

4.    Inflation pressure     200kPa

5.    Maximal sealing gap     5mm

6.    Specification available    φ384×416,φ573×605

Inflatable Rubber Ring