Ads by Google
HAPPY CHINESE NEW YEAR ! pls call mobile +86-13961196930 before Feb 17th,2013
1. Aluminum Sheet: 2 - 200mm
Grade: 6061T6, 6061,5052,6063,3003,491, ly12, 5083,7075,5 A05, 5A02, 2A12, 4001,496,1060,1050,1070,1010, l2y2
2. Aluminum rod : 6 - 400mm
Grade: LC4, LD5 and, 7003,7009,6061 T6, ly12, 5052,7075,2 the A12, 5A02 aluminum rod, aluminum square, aluminum row of hexagonal aluminum, aluminum angle;
3. Main products : aluminum and aluminum alloy plates. Volume, aluminum, aluminum foil, aluminum tubes and aluminum curtain wall aluminum, aluminum patterns, and extra-wide long extra-thick aluminum
4. Application: aerospace, tooling, instrumentation, chemical, construction, packaging, anti-corrosion insulation, air conditioning, solar, refrigerators, travel, electronics, electrical appliances, curtain wall, logos, signs and other various industries.The other products we have :
1.) Pipe insulation dedicated 3A21/LF21/3003 alloy rust-proof aluminum coils, stainless steel anti-corrosion aluminum skin, the pressure aluminum, corrugated aluminum, aluminum tile V125 type YX35-125-750, 840 - 900 type, etc., are widely used in power plant flue gas desulfurization insulation, chemical plants, oil, petrochemical, nuclear power plant.2.) Insulating glass material (aluminum) with aluminum 3003H260.35 * 32.5/26.5 * L, a variety of cutting aluminum: state cable aluminum 1060O, 8011O-state cable foil, aluminum tubes and so on.3.) Petrochemical equipment dedicated wide aluminum coils, 3A21 (LF21) H240.5 * 1600 * L.4.) aluminum pads of the electronic circuit board, 1100H180.13mm, 0.15mm, 0.16mm, 0.17mm, 0.18mm.
Product description:(1) casting coils blank 1060,1050,1070,1100,3003,3105,3 the A21, LF21, 5052,8011, etc(2) all kinds of use aluminum plate, a variety of uses aluminum material, customized according to user requirements.(3)Cable foil, cable aluminum cable coated with aluminum foil, 8011O0.12 ~ 0.20mm width 50 ~ 1300,1060 O0.5 ~ 2.0mm wide, 50 ~ 1300.(4) aluminum-plastic composite pipe Aluminum Strip, 8011O0.16-0.3mm * 10-1200mm * L.(5) aluminum and aluminum curtain wall panel construction, decoration 1070,1060,1050,3003,3 A21H16, H14, H26, H181.5 ~ 4.0mm width 1000 ~ 1300 long 1000 to 6000.(6) billet aluminum foil, aluminum foil wool, 3105 Curtain with ribbon, the 1235,1050,1145,1200,8011 O, H22, H24, H26 Aluminium, H180.20 ~ 0.80mm, width from 800 to 1900(7) Variety of patterns, non-slip aluminum five ribs, the pointer shape pattern, in addition, production of 3003 orange peel pattern aluminum volume.
5. Technical parameters: Technical standards: in accordance with the national standards or technical agreement.
6. Surface quality: 1. level and smooth on the surface of the foil, 2. the foils surface is clean without any corrosion, oil stains, puckering slits, scratches visible striation, rolled marks, shaken traces, cross grain or other defects.3. no shipping spots, rolled marks, abrasive marks or dark lines. 4. no yellowish oil stains, bubbles or seams.
7. Appearance quality: The foil fracture plane is neat and clean without defects like burrs, raw edges, loose coils, arrow heads, mixed layer.
Guide to Ordering When placing an order, check the following items according to the intended use.
1. Specification
2. Size
3. Packaging Mass
Specify the packaging mass in consideration of unloading capacity and working conditions.
Cut Sheets: Normally, 2 tons or more are standard
Coils: Normally, available from 5 tons - 20 tons
Specify the maximum weight (and the minium weight, if necessary)
4. Coil ID/OD
For coils, the inside diameters of 508mm (20 inches) or 610mm (24 inches) are standard. Specify the maximum outside diameter acceptable, if necessary.
5. Surface Finish
6. Reversal Use
Normally, appearance quality is guaranteed for the top side of cut-sheets, and for the outside surface of coils. If the guaranteed side is to be the reverse side of the end product, or if both sides become the face sides of the end products, so specify before hand.
7. Edge Finishing
Specify “slit edge” depending on the conditions of use. Slit edges are recommended especially when the delivered product is used as rolled without further processing, thus requiring edge finishing, or when strict width tolerances are required.
8. Applications
JoinMe Steel exercises thorough quality control over the entire process of manufacturing so as to make ordered products suit the customer’s intended use. When placing an order, therefore, the customer should give the information necessary for quality control, such as intended use and the method of fabrication.
9. Other
Dimensional accuracy, shapes and other requirements are usually within the ranges of JIS. However, assembling accuracy, component accuracy and other conditions may require more rigorous specifications. In such cases, consult us before hand to identify needed specifications.
We offer steel:
From StockJoinMe Steel offers steel products directly from stock to meet prompt shipment demands. We mostly keep HEA, HEB, IPN, IPE, UPN, Steel Plates, Steel Sheets, Angles, Flat Bars, Round Bars and Square Bars in stock.From ProductionIn addition to ready stock, JoinMe Steel supplies steel products from new production to it’s customers.
OUR PRODUCT RANGE INCLUDES:Flat Rolled Products- Hot Rolled Coils, Slits and Sheets- Cold Rolled Coils, Slits and Sheets- Pickled & Oiled Coils and Sheets- Hot Rolled Plates- Hot Dip Galvanised Coils, Slits and Sheets- Electrogalvanised Coils, Slits and Sheets- Prepainted Coils, Slits and Sheets- Tinplate Coils and Sheets, Aluzinc (Galvalume) Coils- Galvanized Corrugated Sheets- Floor / Chequered Sheets (Diamond Shape or Tear Drops)- Stainless Steel, Sheets and CoilsLong Products- Reinforcing Bars (Rebars- Plain or Deformed)- Wire Rod- Wire Mesh- INP, UNP- HEA, HEB- IPE, UPE- Equal and Unequal Angles- Square Bars- Round Bars- Flat Bars- T-Bars and RailsTubes, Pipes, Hollow Sections- Hollow Sections (Square, Rectangular)- Water and Gas Pipes- Large Diameter Steel Pipes (Spirally Welded Steel Pipe)- Seamless Pipes
Part Two. Our Company Advantages
1.High Quality
Strictly Control System and QC personal of Quality, Guaranteed.
2. Our Workshop
3. Professional and Experienced Sales and Service Team
4. Our comfortable Office
5. Delighted Active Atmosphere
6. Competitive Price
We have good co-operation with big mills, have stock total year. we offer the best price to customer upon customers' needs.
7.Our Main Market
Our main markets are Russia, UAE, SA, CANADA, AUSTRALIA, MALAYSIA, COLOMBIA..... so we are professional in dealing with these markets.
Please contact Ms Linda Liu for information, thank you !
S-K-Y-P-E: forever-smiling
E-M-A-I-L: jmsteel yahoo cn
T-E-L : 0 0 8 6 - 1 3 9 6 1 1 9 6 9 3 0
" DO THE BEST STEEL SUPPLIER "