Ads by Google
Factory Advantages
1.Near to raw materials region,low labor costs,so lower production cost,competitive price
2.Locate in the center of China,low and almost same transport costs to any China main port,
3.Advanced technique,
4.More than 10 years production experience,
5.Strict quality testing,good after-sale service,
6.ISO9001:2000 certificate
7.Abundant export experience
8.Accept OEM brand,
9.Small order is accepted.
10.Free samples to test quality.
Raw Materials
1.High hardness abrasive:ensure cutting sharp sex
white aluminum oxide(WA)
2.High quality adhesive resin:ensure good durable performance
Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.
3.High quality reinforced net:ensure the product use security
Product:
| Size(mm) | Size(inch) | Shape | Description(A46#Q4BF) | Colour | Speed(r.p.m) | Speed(m/s) |
105x1.2x16 | 41/7x3/64x5/8 | flat | 1.Material:Aluminium oxide 2.Grit size 60#, 3.Hardness(1):T 4.Bonding agent:resin 5.Reinforced net:two fiberglass nets | Brown,black | 15200 | 80 |
(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.
Application:
they are used by aerospace,plant maintenance,foundry,automotive,metal,fabrication and shipyards
used for cutting stainless steel,inox,tubes,steel sheets,high tensile metal,alloy steel, quench steel, tool steel and hard iron casting metal
Feature:
1.Especially made for professional requestion of cutting stainless steel,
2.Imported resin bonded makes our wheel stronger,
3.Both sides with reinforced fiberglass nets,strengthen,very good safety,
4.Best cutting performance with very fast cutting,
5.Grain edges are sharp,clean cutting action,
6.1.2mm thickness fastest cut rate and minimum material loss,
7.Excellent capacity of heat-transmission,do not burn workpiece,
8.In good balance,comfortable hand-feeling,
9.Only little dust and noise production,
10.Lowest power consumption,high durability.
Automatic production line:ensure the stability of our products
Test Quality
1.Performance testing site
2.The cutting workpiece:D12mm 201 Stainless steel
3.After cutting 10 times,the diameter of the cutting wheel:94mm
4.After cutting 20 times,the diameter of the cutting wheel:85mm
5.After cutting 30 times,the diameter of the cutting wheel:70mm
6.The test report
test result is one piece of 105*1.2*16 mm ,cuting finished. | ||||
Size | cutting object | cutoff quantity | efficiency SEC/cutoff | quality |
105×1.2×16mm | Φ10mm SS rod | 85 | 4 | A |
105×1.2×16mm | Φ10mm SS rod | 55 | 5 | B |
105×1.2×16mm | Φ10mm SS rod | 27 | 7 | C |
7.Cutting result
Install and use advice:
1.Do visually inspect all wheel before mounting for possible damage.
2.Do make sure operating speed of machine, does not exceed speed marked on wheel.
3.Do check mounting flanges for equal size,relieved as required and correct diameter.
4.Make sure workpiece is stable.Hold the tool so that the wheel is at a perpendicular angle to the workpiece being cut;
5.Keep a light touch, as the wheel will break under too much pressure. Do not bump the wheel to start a cut;
6.Feed the wheel through the work as fast as possible without slowing the wheel in the cutting.
Safety Recommendations:
1.Wear protective goggles2.Wear protective gloves3.Wear ear protectors4.Wear dust respirators5.Observe safety recommendations
Packing
1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.
2.During storage,put the wheels horizontally,donot touch the floor directly.
3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees.
Dimensionmm | Dimensioninch | Speedr.p.m | Speedm/s | G.Weightkg | DimensionL*W*H(mm) | Packing pcs/carton |
100x1.2x16 | 4x3/64x5/8 | 15200 | 80 | 18 | 440x230x185 | 800 |
105x1.2x16 | 41/7x3/64x5/8 | 14500 | 80 | 20 | 330x250x230 | 800 |
115x1.2x22.2 | 41/2x3/64x7/8 | 13300 | 80 | 23 | 500x260x195 | 800 |
125x1.2x22.2 | 5x3/64x7/8 | 12200 | 80 | 22 | 410x280x185 | 600 |
150x1.2x22.2 | 6x3/64x7/8 | 10200 | 80 | 21 | 330x330x185 | 400 |
180x1.2x22.2 | 7x3/64x7/8 | 8500 | 80 | 23 | 390x390x145 | 300 |
200x1.2x22.2 | 8x3/64x7/8 | 7600 | 80 | 19 | 428x428x105 | 200 |
205x1.2x25.4 | 8x3/64x1 | 7500 | 80 | 20 | 438x438x105 | 200 |
105mm flexible cutting wheel for indian market